PrintClose   
                

Atlas Copco CM785D

McDowell Construction Equipment

Mike McDowell
2018 Kingsway
Sudbury, Ontario, P3B 4J8
Canada
OFFICE +1 705 566-8190 FAX +1 705-566-6680
LANGUAGES SPOKEN English
Contact DealerSend to a FriendShow All Pics (9)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Sudbury, Ontario, Canada
MAKEAtlas CopcoCATEGORYFor Sale or RentAVAILABLEImmediately
MODELCM785DSTATUSOn YardPRICE
100000 USD
100000
SERIAL#USSG78396FQCLASSUsed
NOTES
  • Type CM/785D/899 2401866
    Serial # USSG78396FQ
    Diesel Power 328
    Rated voltage 24V
    Gross wt 23814
    Engine hours showing 2212 hours,ECM replaced at 30629,total machine hours are 32841
    Recent reported work done,New Rod Changer beam and arms in summer 2015,Compressor done at 12000 hours,Rotary head at 15000hours,Engine done at 20,000hr,New undercarriage complete summer of 2014
    The Following Inspection was done July 19,2016
    Machine was observed running and Drilling and appeared an good working order other than below notes of normal wear. Machine was in use till parked in present condition.
    Front End Drill Attachment
    Presently equipped with 4” ITH Hammer
    6.3 to 7 Meter drill depth
    Base of boom swing cylinder pin lock is welded- play in pin
    Boom hoist cylinder damp very little
    Boom hoist cylinder chrome has pitting
    Base of boom bracket has been welded
    Fatigue cracks in feed 4 at bottom
    Middle wear strip on feed need replacing
    Rod changer hyd cylinder leaking
    Rod changing clamp bent
    Rod charger clamp bracket bent
    Little hyd cylinder for changer guard missing
    Hoses on front end fair 65%
    Hose reels at top of feed needs replacing
    One centralizer jaw worn

    Cabin
    Front window cracked
    Wiper held on tie strap
    Bottom seat cushion needs replacing
    Floor mat worn thru
    Instrument panel cracked
    Rear heating duct missing
    Front heating louvers missing
    Light & wiper panel loose
    Dirt shields (boots) on hand controls needs replacing
    Bolts missing RH console
    Loose wiring back of cab
    Loose wiring under seat
    Lincoln auto lube pump loose on bracket
    Fire suppression system
    Fast fuel
    Engine and Inside Engine compartment
    Cat C13 ACERT
    Engine is very dry
    Alt guard is loose & bent
    Exhaust leak at band clamp
    Heat shield torn off
    Engine coolant level ok
    Rad cap not locking properly
    Supply line to air tank from oil separator leaking
    Engine oil ok,engine level ok
    Hyd fan pump bracket loose & one bolt broken
    Electrical harness above hyd tank look burnt
    Hose at regulator disconnected
    4 x rads need cleaning
    1 rad guard spoke broken
    Drive RH hyd pump dry
    Drive LH hyd pump wet,hose above pump leaking on it
    Needs good cleaning of air compressor screw housing and hyd pump area,stump pans would need to be removed.
    Undercarriage
    RH
    14" pads,3/4" height of grouse
    Chains ITM 90% good
    Idler 90%
    TCR 75%
    Bottom roller 85%
    7 bottom rollers
    Full track guard
    Sprockets 85%
    Track,leveling hyd cylinder dry
    LH Undercarriage same as RH

    Under Belly of Machine
    3x stump pans under engine bent,bolts missing on 2 stamp pans
    Inspection plate under hyd tank bent
    LH rear car body hit

    Dimensions
    OAL Dimensions
    10' W
    36' L
    13' H
    Undercarriage 11'4"
    20' back of machine to front of U/C
    99" outside of tracks to outside of tracks.
  • AdditionalCategory: Drills - Vertical
RENTAL RATES
DAILYCallWEEKLYCallMONTHLYCall