PrintClose   
                

CFS INC 7X7

General Equipment & Supplies, Inc.

Sales Department
4600 Valley Industrial Blvd S
Shakopee, Minnesota, 55379
USA
OFFICE +1 952 224-1500 FAX +1 (952) 224-1570
TOLL FREE (800) 966-1455
LANGUAGES SPOKEN English
Contact DealerSend to a FriendHotlist (6)Show All Pics (9)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Shakopee, Minnesota, USA
STOCK #E00047039SERIAL#DS7X7CFS1AVAILABLEImmediately
MAKECFS INCCATEGORYFor SalePRICE
675250 USD
675250
MODEL7X7STATUSOn Rent
YEAR2016CLASSUsed
NOTES
  • NEW RENTAL PORTABLE CFS/CWMF DENSITY SEPARATOR CLASSIFYING AND LIGHTWEIGHT
    MATERIALS REMOVAL SYSTEM EQUIPPED AS DESCRIBED BELOW:

    - CWMF TIP-UP STYLE PORTABLE TUBULAR CHASSIS WITH TANDEM AXLE SUSPENSION AIR
    BRAKES DIRECTIONAL LIGHTS REMOVABLE GOOSENECK AND MODULAR DESIGN FOR
    UNDERCARRIAGE REMOVAL.
    - LIFTING EYES FOR CRANE CONNECTION.

    - CFS (CLASSIFICATION & FLOATATION SYSTEMS) 7- X 7- DENSITY SEPARATOR DESIGNED
    FOR REMOVING LIGHTWEIGHT PARTICLES FROM CONCRETE SAND DURING WASHING PROCESS
    AT 200 TPH FEED.
    - 8" CLEAN WATER MANIFOLD STRAINER WITH 1/8" OPENINGS.

    - PRIMARY MODEL 2600 CYCLONE FOR PRIMARY PLANT FEED TO DEWATER AND REMOVE 200
    MESH MINUS FROM SEPARATOR FEED. OVERFLOW TO POND WASTE.6" APEX.
    - COARSE PRODUCT SPLITTER GATE WITH GATHERING CHUTE WITH
    DUAL OUTLETS FOR INFINITE ADJUSTABLE CLASSIFICATION.

    - 10FT DSM BANANA SCREEN FOR LIGHTWEIGHT OVERSIZED PARTICLE SEPARATION FROM 24
    MESH SAND AS REMOVED FROM THE WIER OVERFLOW OF THE DENSITY SEPARATOR. 60
    DEGREE ARC 80" RADIUS.
    - SCREEN MEDIA: POLYURETHANE WITH 1.5MM SLOTTED OPENING.

    - INTEGRATED SECONDARY SUMP FOR FINE SAND RECOVERY
    - SECONDARY MODEL 2600 CYCLONE FOR SECONDARY FINES CYCLONE FEEDTO DEWATER FINE
    SAND FOR DISCHARGE INTO FINES PRODUCT SPLITTER GATE. 4" APEX.

    - FINES PRODUCT SPLITTER GATE WITH GATHERING CHUTE WITH DUAL OUTLETS FOR
    INFINITE ADJUSTABLE CLASSIFICATION.
    - ONE DISCHARGE FROM EACH SPLITTER GATE DESIGNATED TO DISCHARGE COARSE AND
    FINE SAND TO CUSTOMER SCREW OR DEWATER SCREEN FOR FINAL DEWATERING BEFORE
    STOCK PILING.

    - PROCESS CONTROLLER LOCATED ON UNIT SELECTABLE DISPLAY WITH PROCESS SETPOINT
    MEASUREMENT AND CURRENT VALVEPOSITION AUTOMATIC OR MANUAL PROCESS CONTROL.
    FRESH WATER FLOW SENSOR.

    - AIR COMPRESSOR-480V 3PH 5 HP SAYLOR BEALL 80 GALLON AIR COMPRESSOR WITH
    STARTER AFTER COOLER TANK AUTO DRAIN FILTER REGULATOR AIR DRYER
    HANKISON HMM3-4.

    - SECONDARY SKID MOUNTED KREBS SLURRYMAX PUMP 75HP 480V 3 PH TO CONNECT TO
    SECONDARY FINES SUMP. MODEL 8X6-22 MMC WITH CENTRIFUGAL SEAL FOR SECONDARY
    CYCLONE FEED AT 14 PSI.

    - PRIMARY SKID MOUNTED KREBS SLURRYMAX PUMP 100HP 480V 3 PH 3500 GALLON
    INTEGRATED SPECIAL DESIGN SUMP WITH FEED TUBE INLET TO RECEIVE SAND FROM
    WASHPLANT FOR PROCESSING DISCHARGE TO FEED PRIMARY CYCLONE MODEL 8X6-22 MMC
    WITH CENTRIFUGAL SEAL FOR PRIMARY CYCLONE FEED AT 12.5 PSI.

    - CATWALKS FOR OBSERVATION AND ACCESS FOR MAINTENANCE OF DSM AND OUTFLOW VALVE
    ON SEPARATOR 1ST STORY 2 SIDES AND OVER SPLITTERS THEN LADDER ACCESS TO
    2ND STORY PLATFORM OVER SECONDARY FOR ACCESS TO VIEW THE WIER OVERFLOW AND
    UPPER CYCLONE.

    GORMAN RUPP PAH4C60C-B PUMP EQUIPPED AS PER BELOW FOR DENSITY SEPARATOR FRESH
    WATER MAINFOLD:
    - 6" X 4"
    - COUPLER
    - IMPELLER TRIM TO 14.125
    - 125 HP 1800 RPM 444T FRAME
    - QUICK COUPLERS FITTINGS CHECK VALVE INSTALLED
    -25- OF SUCTION HOSE WITH FILTER
    - POWER CORD NOT INCLUDED
    - WATER FILTER FOR CUSTOMER PLUMBING BEFORE RISING CURRENT MANIFOLD

    - ELECTRICAL SWITCHGEAR 60X60 NEMA 3R/4 ENCLOSURE WITH 400 AMP MAIN CIRCUIT
    BREAKER AND LOCKABLE OPERATOR ILLUMINATED EMERGENCY STOP BUTTON IN ENCLOSURE
    DOOR MANUALLY OPERATED SAFETY START UP HORN HOUR METER IN DOOR

    MOTORS AND MOTOR CONTROLS:
    - 100 HP MOTOR WITH ALTIVAR 71 VARIABLE FEQUENCY DRIVE- EXTERNAL
    HEATSINK
    - EXTERNAL KEYPAD
    - OPERATOR CONTROLS IN ENCLOSURE DOOR
    - SPEED POTENTIOMETER FOR FREQUENCY CONTROL
    - CUSTOM FABRICATED HEATSINK WEATHERPROOF SHROUD
    - 75 FEET OF 2/4 TYPE W MOTOR LEAD CORD

    - 75 HP MOTOR WITH ALTIVAR VARIABLE FREQUENCY DRIVE- EXTERNAL HEATSINK
    - EXTERNAL KEYPAD
    - OPERATOR CONTROLS IN ENCLOSURE DOOR
    - SPEED POTENTIOMETER FOR FREQUENCY CONTROL
    - 75 FEET OF 2/4 TYPE W MOTOR LEAD CORD

    - 125 HP MOTOR WITH ABB BRAND REDUCED VOLTAGE SOFT STARTER
    - INTEGRATED BYPASS CONTACTOR
    - OPERATOR CONTROLS IN ENCLOSURE DOOR
    - 75 FEET OF 1/0 GGC TYPE W MOTOR LEAD CORD

    - 20 HP SPARE MOTOR WITH ABB BRAND NEMA/IEC RATED SIZE 2 ACROSS THE LINE STARTER
    - OPERATOR CONTROLS IN ENCLOSURE DOOR
    - WIRED TO A 60 AMP HUBBELL RECEPTACLE
    - 60 AMP MATING PLUG INCLUDED
    - 75 FEET OF 8/4 TYPE SO MOTOR LEAD CORD

    - 15 AMP FEED BREAKER
    - WIRED TO 20 AMP HUBBELL RECEPTACLE
    - 20 AMP MATING PLUG INCLUDED
    - 75 FEET OF 8/4 TYPE SO LEAD CORD

    POWER CORD:
    (3) 100 FOOT CUTS OF 250 MCM TYPE W CABLESPHASE CONDUCTORS
    (1) 100 FOOT CUT OF 4/0 TYPE W CABLE EQUIPMENT GROUNDING CONDUCTOR
    (1) SET OF 400 AMP FEMALE RECEPTACLES INSTALLED IN PANEL TO RUN GORMAN RUPP
    FRESH WATER PUMP

    *SPECIAL DISCLAIMER TO ALL END USERS* WEIGHTS FOR CUSTOMER SUPPLIED FOUNDATION:
    FIGURE 75 000# OPERATING WEIGHT PER COLUMN DEAD LOAD PER COLUMN TOTAL (4)
    COLUMNS EA FOR SUPPORT. GES/CMWF/CFS ARE NOT RESPONSIBLE FOR
    DAMAGES/INJURIES/VERIFICATIONS OF ANY KIND FOR OPERATING WEIGHTS FOOTINGS
    FAILURE OR IMPROPER EQUIPMENT SUPPORT FOOTINGS OR OTHER. END USER IS
    RESPONSIBLE FOR PROPER ENGINEERING OF FOOTINGS AND SOIL TESTING ON LOCATION.

    SETUP/TEARDOWN FOUNDATION WORK ERECTION WIRING PLUMBING NOT INCLUDED.