PrintClose   
                

Superior 6203-32OF

General Equipment & Supplies, Inc.

Sales Department
4300 Main Ave
PO Box 2145
Fargo, North Dakota, 58103
USA
OFFICE +1 701 282-2662 FAX +1 (701) 364-2190
TOLL FREE (800) 437-2924
Contact DealerSend to a FriendHotlist (5)Show All Pics (5)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Fargo, North Dakota, USA
STOCK #E00050503SERIAL#1078601AVAILABLEImmediately
MAKESuperiorCATEGORYFor SalePRICE
324500 USD
324500
MODEL6203-32OFSTATUSOn Yard
YEAR2017CLASSUsed
NOTES
  • SUPERIOR 6203-32OF OVERHEAD FEED SCREEN PLANT EQUIPPED AS PER BELOW:

    CARRIER CHASSIS:
    - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
    - TANDEM AXLE WITH (8) 11X22.5 RADIAL TIRES
    - COMPLETE AIR BRAKE SYSTEM
    - MUDFLAPS ON REAR AXLE
    - TRAVEL LIGHTS WITH BRAKE AND DIRECTIONAL SIGNALS
    - FIFTH WHEEL HITCH
    - 1-2 GREASE POINTS FOR GREASING THE PLANT
    - (8) FIXED STRUCTURAL CRIBBING LEGS
    SUPERIOR 6203-32 HORIZONTAL (FLAT) SCREEN:
    - RIGHT HAND DRIVE COIL SPRINGS BASEFRAME 5- PANELS END TENSION
    BOTTOM DECK
    - 40 HP TEFC 1200 RPM 480 VOLT 3 PHASE 60 HZ SCREEN DRIVE MOTOR
    - ADJUSTABLE MOTOR MOUNT MOTOR AND SCREEN DRIVE SHEAVE V-BELT
    DRIVE AND DRIVE GUARD
    SCREEN DISCHARGE CHUTES:
    - CHUTES ARE IN FIXED POSITION
    - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR400 STEEL LINER
    - TOP DECK CHUTE DISCHARGES ONTO TOP OR MIDDLE DECK CROSS CONVEYOR
    - (4) FLOP GATES
    - MIDDLE DECK CHUTE DISCHARGES ONTO MIDDLE OR BOTTOM DECK CROSS
    CONVEYOR
    - (4) FLOP GATES
    - BOTTOM DECK CHUTES DISCHARGE ONTO CROSS CONVEYOR
    FINES HOPPER:
    - 1/4" AR CONSTRUCTION
    - FULL LENGTH RUBBER ADJUSTABLE FLASHING
    (1) 42" SCREEN FEED CONVEYOR:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - ROCK BOX HOPPER RECEIVES FEED MATERIAL FOR SCREEN
    - ADJUSTABLE RUBBER FULL LENGTH OF ROCK BOX HOPPER
    - FULL LENGTH STEEL SKIRTING (NO FLASHING PAST HOPPER)
    - CLASS II HEAD END DRIVE
    - 25 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
    -DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY: 14" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
    - TAIL PULLEY: 14" DIAMETER WING PULLEY
    - SHAFTS TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - C5 IMPACT IDLERS IN LOAD ZONE
    - CARRY IDLERS: C5 20 DEGREE TROUGH CHANNEL MOUNT SPACED 26" ON
    CENTER
    - BELTING 3 PLY 1/4" X 1/16" 330 PIW
    - VULCANIZED BELT SPLICE
    - HYDRAULIC CYLINDERS RAISE CONVEYOR FROM TRAVEL TO OPERATING
    POSITION
    - EXTERRA PRIMARYBELT CLEANER
    (3) 30" WIDE X 11- LONG REVERSING CROSS CONVEYORS:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - MOUNTED ON ROLLERS TO MANUALLY MOVE TO DISCHARGE FROM EITHER
    SIDE OF CHASSIS
    - RECEIVE OVERSIZE MATERIAL FROM RESPECTIVE MIDDLEAND BOTTOM
    DECKS
    - CLASS II HEAD END
    - 7.5 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
    - DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY: 10" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
    - TAIL PULLEY: 10" DIAMETER WING PULLEY
    - SHAFTS TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS: C5 20 DEGREES TROUGH CHANNEL MOUNT SPACED 26" ON
    CENTER
    - BELTING 3-PLY 3/16" X 1/16" 440 PIW
    - VULCANIZED BELT SPLICE
    - EXTERRA PRIMARY BELT CLEANER
    (1) 60" FINES CONVEYOR:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME 6- DISCHARGE HEIGHT
    - CLASS II HEAD END DRIVE
    - 15 HP MOTOR V-BELT DRIVE
    - DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY: 12" DIAMETER DRUM CROWN FACE 3/8" HERRINGBONE
    LAGGING
    - TAIL PULLEY: 12" DIAMETER CHEVRON WING PULLEY
    - SHAFTS TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS: C5 20 DEGREES PICKING CHANNEL MOUNT SPACED
    APPROXIMATELY 27" ON CENTER
    - RETURN IDLERS: C45 FLAT ROLLS SPACED 10- ON CENTER
    - BELTING 3-PLY 3/16" X 1/16" 440 PIW
    - VULCANIZED BELT SPLICE
    - EXTERRA PRIMARY BELT CLEANER
    HYDRAULIC RUN-ON LEVELING JACKS:
    - (4) 6" X 18" HYDRAULIC CYLINDERS WITH HYDRAULIC LOCK (COUNTER
    BALANCE VALVES BUILT INTO CYLINDER HEADS)
    - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
    - 9 HP HONDA MOTOR GAS OVER HYDRAULIC ENCLOSED CABINET
    WALKWAYS:
    - 3/16" DIAMOND TREAD PLATE ALONG BOTH SIDES AND FEED END OF SCREEN
    WITH DRAIN HOLES
    - INCLUDES TOE BOARD AND TWO-RAIL HANDRAIL
    - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS WITH (2) STEEP ANGLE
    STAIR ACCESS LADDERS
    PAINT:
    - (1) COAT PRIMER; (1) COAT ENAMEL; PAINTED GRAPHITE GRAY ( CARRIER
    AND SCREEN) HANDRAILS LADDERS AND GUARDING PAINTED ORANGE
    - GUARDING FOR DRIVE AND TAIL PULLEYS V-BELT DRIVE AND RETURN IDLERS.
    GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO
    HAVE GUARDING INSPECTED.

    ELECTRICAL ENCLOSURE WITH SHORT LEGS - WILL SET ON FRAME FOR TRAVEL - REMOVE TO OPERATE;
    - MAIN BREAKER
    - 50 HP SCREEN
    - 25 HP OVERHEAD FEED CONVEYOR
    - 20 HP UNDERSCREEN PRODUCT CONVEYOR
    - (3) 5 HP CROSS CONVEYOR
    - (1) SPARE 50 HP STARTER AND BREAKER - CUSTOMER TO SUPPLY AND
    INSTALL RECEPT.
    - (2) SPARE 20 HP STARTERS AND BREAKERS - CUSTOMER TO SUPPLY AND
    INSTALL RECEPT.
    - (1) 5 HP SPARE FOR FUTURE SLIDE IN REJECT CONVEYOR
    - 110 OUTLET ON PANEL SIDE
    - BUTTONS IN THE PANEL DOOR -UPPER LEFT CORNER
    - 100- OF MAIN POWER CORD
    - ALL MOTORS WIRED TO PANEL LOCATED ON LEFT REAR OF PLANT WITH
    ENOUGH CORD TO LOCATE PANEL 30- AWAY