PrintClose   
                

Finlay I-140
General Equipment & Supplies, Inc.

Sales Department
4300 Main Ave
PO Box 2145
Fargo, North Dakota, 58103
USA
OFFICE +1 701 282-2662 FAX +1 (701) 364-2190
TOLL FREE (800) 437-2924
Contact DealerSend to a FriendHotlist (5)Show All Pics (6)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Fargo, North Dakota, USA
STOCK #E00052755SERIAL#TRX140ICLOMH44208AVAILABLEImmediately
MAKEFinlayCATEGORYFor SalePRICE
625000 USD
625000
MODELI-140STATUSOn Rent
YEAR2018CLASSUsed
NOTES
  • FINLAY I-140 TRACKED IMPACTOR PLANT EQUIPPED AS PER BELOW:

    ENGINE:
    - TIER 4 FINAL/STAGE IV: SCANIA DC13 373KW (500HP) ENGINE
    IMPACT CHAMBER:
    - TEREX CR032 IMPACT CHAMBER
    - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON
    RELEASE
    - HYDRAULIC RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
    - 4 BAR ROTOR - TOOL STEEL BLOW BARS 2 HIGH AND 2 LOW
    - ROTOR FITTED WITH (2) FULL CERAMIC BLOW BARS AND (2) DUMMY BARS
    - DIRECT DRIVE VIA CLUTCH
    - DRIVE BELTTENSIONER WHEEL
    - BLOW BAR LIFTING TOOL SUPPLIED
    - TIP SPEED RANGE 35-44M/SEC (115-144 FT./SEC)
    HOPPER & FEEDER:
    - VGF FIXED HOPPER
    - STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN WITH 2" AND 2.5" ERINS
    FINGERS INSTALLED
    - MESHAPERTURE ON GRIZZLY FEEDER: 38MM
    - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
    - BLANKING MAT FOR VGF
    - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING
    HOPPER 50 MM CASSETTE SPACING & 38MM MESH AS STANDARD
    - INDEPENDENT PRE-SCREEN BLANKING MAT INCLUDED WITH PRE-SCREEN
    OPTION
    MAIN CONVEYOR:
    - 1300MM (51") BELT FULL LENGTH
    - HYDRAULIC RAISE/LOWER FOR MAGNET
    - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS
    (C/W SHORTENED MAIN CONVEYOR)
    - ADDITIONAL DUST COVER
    AUXILARY CONVEYORS:
    - PIPED FOR OVERBAND MAGNET
    - TWIN POLE OVERBAND MAGNET C/W STAINLESS STEEL SKIRTING &
    STAINLESS STEEL DISCHARGE CHUTE
    DUST SUPPRESSION:
    - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS
    ELECTRICAL:
    - EMERGENCY STOPS
    - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
    - T-LINK TELEMETRY SYSTEM FITTEC C/W 3 YEARS DATA SUBSCRIPTION
    - RADIO REMOTE SYSTEM
    - PRESSURISED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
    - LIGHTING MAST
    GENERAL:
    - 2 SPEED TRACKING
    ADDED OPTION:
    - ELECTRIC PUMP FOR SPRAY BAR SYSTEM
    - GUARDING WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL LOCAL
    CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED
    BY A LOCAL INSPECTOR