PrintClose   
                

Finlay I-140

General Equipment & Supplies, Inc.

Sales Department
4600 Valley Industrial Blvd S
Shakopee, Minnesota, 55379
USA
OFFICE +1 952 224-1500 FAX +1 (952) 224-1570
TOLL FREE (800) 966-1455
LANGUAGES SPOKEN English
FINLAY I-140 
Aggregate Impact Crushers
2018
Contact DealerSend to a FriendHotlist (5)No Pics
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Shakopee, Minnesota, USA
STOCK #E00054458SERIAL#TRX140ICJOMI57043AVAILABLEImmediately
MAKEFinlayCATEGORYFor SalePRICE
787500 USD
787500
MODELI-140STATUSOn Rent
YEAR2018CLASSUsed
NOTES
  • FINLAY I-140 EQUIPPED AS PER BELOW:

    ENGINE:
    TIER 4 FINAL /STAGE IV : SCANIA DC13 373KW (500HP) ENGINE

    IMPACT CHAMBER:
    - TEREX CR032 IMPACT CHAMBER
    - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
    - MANUALRAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
    - 4 BAR ROTOR - TOOL STEEL BLOW BARS 2 HIGH & 2 LOW
    - DIRECT DRIVE VIA CLUTCH
    - DRIVE BELT TENSIONER WHEEL
    - BLOW BAR LIFTING TOOL SUPPLIED
    - TIP SPEED RANGE 35-44 M/SEC (115-144 FT./SEC).
    - HYDRAULIC RAISE OF CHAMBER INLET FLAP
    - ROTOR FITTED WITH 2 FULL HIGH CHROME & 2 LOW MARTENSITIC BLOW BARS

    HOPPER AND FEEDER
    - VGF FIXED HOPPER
    - 2.5" ERIN FINGERS INSTALLED IN THE FIRST SECTION 2" ERIN FINGERS IN THE SECOND SECTION ERINS FINGERS ARE STEPPED DOWN
    - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
    BLANKING MAT FOR VGF
    - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
    BLANKING MAT. 50MM CASSETTE SPACING & 38MM MESH AS STANDARD.
    - INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS

    MAIN CONVEYOR:
    - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED
    MAIN CONVEYOR)
    - BELT WEIGHER ON MAIN CONVEYOR
    - ADDITIONAL DUST COVER

    AUXILIARY CONVEYORS:
    - PIPED FOR OVERHEAD BANDING
    - BYPASS CONVEYOR WITH 800MM WIDE PLAIN BELT DISCHARGING TO THE RHS OF THE
    MACHINE.
    - TWIN POLE OVERBAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS - STEEL
    DISCHARGE CHUTE DISCHARGING TO RHS OF THE MACHINE.

    CLIMATE SPEC:
    - STANDARD OILS - (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30›¼°C)

    DUST SUPRESSION:
    - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS

    ELECTRICAL:
    - EMERGENCY STOPS
    - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
    - T-LINK TELEMETRY SYSTEM FITTED C/W 3 YEARS DATA SUBSCRIPTION
    - RADIO REMOTE SYSTEM
    - PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
    - LIGHTING MAST

    GENERAL:
    - SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE
    - AUXILIARY DRIVE