PrintClose   
                

Other 6203

General Equipment & Supplies, Inc.

Sales Department
4300 Main Ave
PO Box 2145
Fargo, North Dakota, 58103
USA
OFFICE +1 701 282-2662 FAX +1 (701) 364-2190
TOLL FREE (800) 437-2924
Contact DealerSend to a FriendHotlist (5)Show All Pics (7)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Fargo, North Dakota, USA
STOCK #E00056279SERIAL#P-6-20-3-W-362-16AVAILABLEImmediately
MAKEOtherCATEGORYFor SalePRICE
296500 USD
296500
MODEL6203STATUSOn Rent
YEAR2016CLASSUsed
NOTES
  • USED PORTABLE 6X20 3 DECK CEDARAPIDS/EAGLE/FABTEC WASH PLANT WITH EAGLE 36" X 25- TWIN SANDSCREW EQUIPPED AS PER BELOW:



    - SCREEN OVERHAULED AT 2870.3 HOURS



    CARRIER:

    - THREE AXLE CARRIER 18" WF 50# DROP CENTER STYLE:

    - HUTCH EQUALIZING SUSPENSION.

    - 22 500# STANDARD FORGE AXLES 11:00RX22.5 TIRES.

    - 4 GROUND SUPPORT STANDS STANDARD 5TH WHEEL PLATE.

    - AIR BRAKES BRAKE LIGHTS REFLECTOR TAPE MARKER LIGHTS AND MUD

    FLAPS.

    CEDARAPIDS TSV6203-32 SCREEN:

    - TECO 40 HP TEFC 1200 RPM.

    - HUCK BOLTED SCREEN SIDES.

    - ADJUSTABLE OVAL STROKE ANGLE & LENGTH OF STROKE AND SPEED.

    - SELF-ALIGNING SPHERICAL ROLLER BEARINGS.

    - SPLASH TYPE OIL SYSTEM.

    - RIGHT HAND DRIVE SIDE TENSION ON ALLDECKS 5- PANELS COIL SPRINGS

    AND SUBFRAME

    15 BAR WASH SYSTEM:

    - FULL LENGTH MANIFOLD WITH INLET PIPE AND FLANGE.

    - INDIVIDUAL BRASS GATE VALVES.

    - EL JAY SPRAY BAR SEALING BOOTS.

    - SCH. 40 1oe"Ø SPRAY BARS WITH BRASS "VEEJET" NOZZLES

    - FRESH WATER FLUSH SYSTEM.

    AR LINED DISCHARGE CHUTES WITH EASY ACCESS TO PRODUCT CONVEYORS

    UNDER SCREEN COLLECTION HOPPER

    EAGLE TWIN 36" X 25- TWIN FINE MATERIAL WASHER WITH NI-HARD FLIGHTS:

    - HEAVY DUTY MOUNTING FOR DUAL 36" X 25- FINE MATERIAL WASHER

    - DISCHARGE CHUTES

    - OVERFLOW FLUME

    - 30 HP 1800 RPM TEFC ELECTRIC MOTOR

    WALKWAYS 48" PLATFORM AT FEED END OF SCREEN 42" TUBESTEEL HANDRAILS 3" TOE

    BOARDS AND ACCESS LADDER

    - SAFTY GUARDS SAND BLASTE CHASSIS RUSH INHIBITO PRIMER AND TWO

    FINISH COATS PAINTED TEREX WHITE

    OPTIONS INCLUDED:

    - (1) 30" X 12- AND (1) 24" X 12- CROSS CONVEYORS ON 2ND AND 3RD DECKS 5 HP

    TEFC MOTORS

    - CHANNEL INSET IDLERS

    - VULCANIZED LAGGED HEAD PULLEY AND SELF-CLEANING WING TAIL PULLEY

    - DODGE SCM BEARINGS

    - FULL SKIRT BOARD WITH WIPER

    - MOUNTED ON SLIDERS WITH HOLD-DOWN BRACKETS

    - SLURRY BOX WITH (3) WATER OUTLETS INCLUDING FOLD-DOWN SUPPORT

    STAND

    - 12V HYDRAULIC FOLD FOR SLURRY BOX

    - (4) LEG BINKLEY LANDING GEAR

    - (4) TELESCOPING SCREW TYPE STABILIZING STANDS

    - PANEL STYLE BLENDING 1ST TO 2ND AND FLOP GATE FOR 2ND TO 3RD

    PRODUCTS

    - TOOL BOX MOUNTED ON CARRIER

    - VULCANIZE SPLICE CROSS CONVEYOR BELTS

    - SUPERIOR BELT WIPERS ON 24" AND 30" CROSS CONVEYORS

    - PRODUCT CHUTES BUILT IN HEAVY DUTY ROLL-OUT FASHION FOR

    MAINTENANCE

    - WALKWAYS BOTH SIDES FOR EASE OF SCREEN CLOTH CHANGES

    AES ELECTRICAL SWITCHGEAR FOR 6X20 WASH PLANT:

    - 60X48 NEMA 4 ENCLOSURE WITH BACK PANEL EQUIPPED AS FOLLOWS:

    - 400 AMP MAIN CIRCUIT BREAKER WITH ROTARY OPERATOR LOCKABLE

    - CUSTOM LEG KIT AND WELDED UPPER LEG SECTIONS

    - DRIP SHIELD

    - 800 WATTPANEL HEATER

    - ILLUMINATED E-STOP OPERATOR

    - MANUALLY OPERATED SIGNAL START UP HORN

    - HOUR METER

    - ALL CONTROLS INSTALLED IN ENCLOSURE DOOR

    - (3) 100 FOOT LENGTH RUNS OF 250W POWER SUPPLY CABLE

    - (1) 100 FOOT LENGTH RUN OF 4/0W EQUIPMENT GROUND

    - (1) NEMA SIZE 3 FVNR MOTOR STARTER SCREEN MOTOR - 40HP

    - (1) ABB ACS850 30 HP VARIABLE FREQUENCY DRIVE TO OPERATE TWIN 15 HP

    SCREW MOTORS WITH POTENTIOMETER SPEED CONTROL

    - (4) NEMA SIZE 2 FVNR MOTOR STARTERS SPARE 1-4- 20HP EACH WIRED TO 60

    AMP HUBBELL RECEPTACLES.

    - (2) NEMA SIZE 1 FVNR MOTOR STARTERS CROSS CONVEYOR 1 AND 2 5HP

    EACH

    - (1) 100 AMP FEED BREAKER WIRED TO A 100 AMP HUBBELL RECEPTACLE.

    - (1) 60 AMP FEED BREAKER WIRED TO A 60 AMP HUBBELL RECEPTACLE.

    - 5 KVA TRANSFORMER EXTERNALLY MOUNTED.

    - (1) 120 VOLT 20 AMP GFCI DUPLEX RECEPTACLE INSTALLED IN

    WEATHERPROOF BOX AND COVER

    - OVER-SCREEN SAFETY TIE-OFF CABLE.

    - GUARDING -WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL

    LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM

    CHECKED BY A LOCAL INSPECTOR