PrintClose   
                

Superior 6203-32

General Equipment & Supplies, Inc.

Sales Department
4300 Main Ave
PO Box 2145
Fargo, North Dakota, 58103
USA
OFFICE +1 701 282-2662 FAX +1 (701) 364-2190
TOLL FREE (800) 437-2924
Contact DealerSend to a FriendHotlist (5)Show All Pics (12)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Fargo, North Dakota, USA
STOCK #E00053140SERIAL#1205276AVAILABLEImmediately
MAKESuperiorCATEGORYFor SalePRICE
270500 USD
270500
MODEL6203-32STATUSOn Rent
YEAR2018CLASSUsed
NOTES
  • SUPERIOR 6X20 3D SCREEN PLANT - XLT PACKAGE:

    CARRIER CHASSIS:
    - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
    - TANDEM AXLE WITH (8) 11X22.5 RADIAL TIRES
    - COMPLETE AIR BRAKE SYSTEM
    - MUDFLAPS ON REAR AXLE
    - TRAVEL LIGHTSWITH BRAKE AND DIRECTIONAL SIGNALS
    - FIFTH WHEEL HITCH
    - (4) FIXED STRUCTURAL STEEL CRIBBING LEGS
    - AREA GUARDING AROUND MAIN FRAME OF PLANT (WHERE REQUIRED)
    TRAVELS AT 12- 6" WIDE AND 14- 6" TALL

    SUPERIOR GUARDIAN 6203 HORIZONTAL VIBRATING SCREEN:
    - SUPPLY AND INSTALLATION FOR A 6X20 3 DECK ALL PERTINENT ITEMS AND COMPONENTS
    INCLUDING:
    - ADJUSTABLE MOTOR BASE MOTOR SHEAVE SCREEN SHEAVE V-BELTS DRIVE GUARD
    - SCREEN AND ALL PERTINENT ITEMS AND COMPONENTS ARE SUPPLIEDBY SUPERIOR
    - PRICE INCLUDES THE FOLLOWING ITEMS:
    - 40 HP TEFC 1200 RPM 480 VOLT 3 PHASE 60 HZ SCREEN DRIVE MOTOR
    SCREEN SUBFRAME
    - SCREEN IS INSTALLED TO OPERATE IN THE HORIZONTAL POSITION
    RIGHT HAND DRIVE
    - SIDE TENSION DECKS

    ROLL-AWAY OPTION ON DISCHARGE CHUTES:
    - ROLLERS MOUNTED UNDER CHUTE SUPPORT STRUCTURE
    - DESIGNED TO MOVE DISCHARGE CHUTES AWAY FROM THE SCREEN
    - ALLOWS FOR ACCESS TO THE FRONT OF SCREEN FOR MAINTENANCE
    - DISCHARGE CHUTE CURTAINS AND SEALING AROUND CHUTES TO PREVENT SPILLAGE ON
    CROSS CONVEYORS

    BLENDING GATES:
    - (4) FLOP GATES IN EACH CHUTE; EACH GATE MANUALLY OPERATED BY A LEVER OUTSIDE
    THEIR RESPECTIVE CHUTE
    - CONSTRUCTED OF 1/4" MILD STEEL WITH WELD-ON 1/4" AR LINERS
    -TOP DECK CHUTE DISCHARGES OVER THE KINGPIN END OF THE CHASSIS OR ONTO MIDDLE
    DECK CROSS CONVEYOR 25% BLENDING GATES
    - MIDDLE DECK CHUTE DISCHARGES ONTO MIDDLE OR BOTTOM DECK CROSS CONVEYOR 25%
    BLENDING GATES
    - BOTTOM DECK CHUTES DISCHARGES ONTO BOTTOM OR "BLENDS UP" TO MIDDLE DECK CROSS
    CONVEYOR 25% BLENDING GATES
    - AR LINERS ON BOTH SIDES OF BLENDING GATES

    SCREEN DISCHARGE LIPS REQUIRED: 1/4" MILD STEEL WITH 1/4" WELD-ON AR LINERS:
    - TOP DECK - 6" DISCHARGE LIP
    - MIDDLE DECK - 6" DISCHARGE LIP
    - BOTTOM DECK - 14" DISCHARGE LIP

    FINES HOPPER:
    - 1/4" AR PLATE STEEL SIDES
    - ADJUSTABLE RUBBER FLASHING FULL LENGTH

    (2) 30" WIDE X 12- LONG REVERSING CROSS CONVEYORS:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - MOUNTED ON ANGLE IRON SLIDE TRACK TO MANUALLY MOVE TO DISCHARGE FROM EITHER
    SIDE OF CHASSIS
    - RECEIVE OVERSIZE MATERIAL FROM RESPECTIVE MIDDLE AND BOTTOM DECKS
    - CLASS II HEAD END DRIVE
    - 7.5 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
    - DODGE SHAFT MOUNT REDUCER CLASS II
    - HEAD PULLEY - 10" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
    - TAIL PULLEY - 10" DIAMETER WING PULLEY
    - SHAFTS - TURNED AND POLISHED
    - DODGE SCM BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS - C5 20 DEGREES TROUGH CHANNEL MOUNT SPACED 26" OC
    - BELTING - 3 PLY 3/16" X 1/16" 330 PIW
    - BELT SPLICE - VULCANIZED SPLICE
    - SCRAPER - EXTERRA PRIMARY - LOW PRO MOUNT

    60" FINES CONVEYOR:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - CLASS II HEAD ENDDRIVE
    - 15 HP MOTOR V-BELT DRIVE
    - DODGE SHAFT MOUNT REDUCER CLASS II
    - HEAD PULLEY - 12" DIAMETER DRUM CROWN FACE 3/8" HERRINGBONE LAGGING
    - TAIL PULLEY - 12" DIAMETER CHEVRON WING PULLEY
    - SHAFTS - TURNED AND POLISHED
    - DODGE S2000 BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS - C5 20 DEGREE INBOARD MOUNT PICKING IDLERS SPACED
    APPROXIMATELY 27" OC
    - RETURN IDLERS - C5 FLAT ROLLS SPACED 10- OC
    - BELTING - 3 PLY 3/16" X 1/16" 330 PIW
    - BELT SPLICE - VULCANIZED SPLICE

    HYDRAULIC "LIFT-ONLY" LEVELING JACKS:
    - (4) 6" X 20" HYDRAULIC CYLINDERS
    - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
    - 12 VOLT HYDRAULIC PUMP UNIT

    WALKWAY:
    - 3/16" DIAMOND TREAD PLATE ALONG BOTH SIDES AND FEED END OF SCREEN
    INCLUDES TOE BOARD AND TWO-RAIL HANDRAIL
    - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS WITH (2) VERTICAL ADJUSTABLE
    LADDER ASSEMBLIES
    - SELF CLOSING HINGED GATE ACCESS FROM LADDER TO WALKWAY
    - MOTOR CROSS OVER STAIRS

    VOLTAGE:
    - REQUIRED POWERIS 480 V/ 3 PH / 60 HZ

    ELECTRICAL CONTROL PANEL - NEMA 4
    - NEMA 4 ENCLOSURE AND NEMA SQUARE D OR ALLEN BRADLEY ELECTRICAL COMPONENTS
    - WIRED TO ON-PLANT MOTORS
    - (1) 40 HP SCREEN DRIVE MOTOR
    - (1) 15 HP FINES CONVEYOR DRIVE MOTOR
    - (2) 7.5 HP REVERSING CROSS CONVEYORS
    - AMP GUAGE ON OUTSIDE OF PANEL
    - HOUR METER INSIDE PANEL
    - WARNING HORN AND LIGHT
    - LABELLED START/STOP PUSHBUTTONS AND E-STOP PUSHBUTTON MOUNTED ON DOOR OF
    ELECTRICAL PANEL
    - MOUNTED ON SKID FRAME WITH LIFTING EYES
    - POWER CABLES FROM MOTORS TO PLACE PANEL 30- FROM PLANT CABLE STORAGE
    - INCLUDES 2 EXTRA #2 STARTERS
    - CABLES RAN USING BEHRINGER CLAMPS MOUNTED ON WELD-IN UNISTRUT
    - WIRE WRAPS ON MAIN BEAM OF PLANT

    TOOLBOX:
    - CONSTRUCTED OF ALUMINUM AND MOUNTED ON CHASSIS
    - TWO LATCHES ON HINGED COVER
    - 20"X28"X60" LONG

    OVERHEAD SAFETY TIE OFF:
    - SAFETY TIE OFF OVER PLANT FOR WORKERS TO TIE OFF WHEN WORKING ON SCREEN
    - FOLDS DOWN FOR TRANSPORT

    GUARDING:
    - PRICE INCLUDES STANDARD GUARDING
    - CUSTOMER IS RESPONSIBLE TO HAVE ALL GUARDING INSPECTED
    - WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL LOCAL CODES. IT
    IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED BY A
    LOCAL INSPECTOR

    PAINT -- SUPERIORCOLOR SCHEME
    - (1) COAT PRIMER; (1) FINISH COAT ENAMEL
    - SUPERIOR COLOR SCHEME - SUPERIOR ORANGE HANDRAIL AND GUARDING: DIAMOND VOGEL :
    IB55-43477
    - CHASSIS - GRAPHITE GRAY RAL 7024
    - SCREEN - WINDOW GRAY RAL 7040

    OWNER-S MANUAL:
    - (1) COPY INCLUDED FOR OPERATION AND MAINTENANCE

    SUPERIOR ELECTRICAL SWITCHGEAR PANEL EQUIPPED AS PER BELOW:
    - NEMA 4 ENCLOSURE AND NEMA SQUARE D OR ALLEN BRADLEY ELECTRICAL
    COMPONENTS
    - WIRED TO ON-PLANT MOTORS
    - (1) 40 HP SCREEN DRIVE MOTOR
    -(1) 15 HP FINES CONVEYOR DRIVE MOTOR
    - (2) 7.5 HP REVERSING CROSS CONVEYORS
    - AMP GUAGE ON OUTSIDE OF PANEL
    - HOUR METER INSIDE PANEL
    - WARNING HORN AND LIGHT
    - LABELLED START/STOP PUSH BUTTONS AND E-STOP PUSHBUTTON MOUNTED
    ON DOOR OF ELECTRICAL PANEL
    - MOUNTED ON SKID FRAME WITH LIFTING EYES
    - POWER CABLES FROM MOTORS TO PLACE PANEL 30- FROM PLANT CABLE
    STORAGE
    - INCLUDES QTY. (2) EXTRA #2 STARTERS
    - CABLES RAN USING BEHRINGER CLAMPS MOUNTED ON WELD-IN UNISTRUT
    - WIRE WRAPS ON MAIN BEAM OF PLANT
    - 100- OF 4/0 TYPE AWG MAIN POWER CORD