PrintClose   
                

Canica CRV2000

General Equipment & Supplies, Inc.

Sales Department
4300 Main Ave
PO Box 2145
Fargo, North Dakota, 58103
USA
OFFICE +1 701 282-2662 FAX +1 (701) 364-2190
TOLL FREE (800) 437-2924
CANICA CRV2000 
Aggregate Impact Crushers
2019
Contact DealerSend to a FriendHotlist (5)No Pics
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Fargo, North Dakota, USA
STOCK #E00055195SERIAL#TRX2000VCOKKE1254AVAILABLEImmediately
MAKECanicaCATEGORYFor SalePRICE
447500 USD
447500
MODELCRV2000STATUSOn Rent
YEAR2019CLASSUsed
NOTES
  • CANICA CRV2000 IMPACTOR CRUSHING PLANT EQUIPPED AS PER BELOW:

    - TEREX CANICA 2000 VERTICAL SHAFT IMPACTOR WITH AUXILIARY ELECTRICAL CONTROL
    CABINET WITH RPM GUAGE VIBRATION DETECTOR (WARNING) LIGHT HOUR METER
    OPEN-LID CRUSHERSAFETY CUT-OFF 2 HP LUBE SYSTEM STARTER OIL SYSTEM HEATER
    STARTER AND 15 HP SPARE STARTER. CONTAINS TERMINATION POINTS FOR ALL SAFETY
    SHUT-OFF SWITCHES.
    - PANTENTED "HYDRALID" HYDRAULIC LID LIFTER & MODULAR OIL LUBE SYSTEM
    - 48(1219MM) WIDE COVERED PRODUCT CONVEYOR AND HOOD WITH 15 HP (11 KW)
    ELECTRIC MOTOR
    - EXTERNALLY ADJUSTABLE FEED TUBE SYSTEM FEED HOPPER WITH BANG BOARD
    - SERVICE PLATFORMS AROUND CRUSHER WITH INCLINED ACCESS LADDER TO GROUND
    - EASY MAINTENANCE FEATURES; REMOTE GREASE LINES GROUND ACCESS CONE
    LUBRICATION MODULE
    - EMERGENCY STOP BUTTONS ON BOTH SIDES OF THE FRAME
    - TANDEM AXLE SPRING SUSPENSION WITH EIGHT (8) 295/75 R22.5 TIRES
    - 48" (1219MM) LONG LOCKABLE SIDE-MOUNTED STORAGE BOX
    - 2000 ROCK ON STEEL (ROS) VSI SINGLE DRIVE WITH HEAVY DUTY ROTOR AND
    ANVILS - UP TO 300 STPH FEED RATE AND UP TO 2 1/2" (63MM) FEED SIZE
    - 460 VOLT 3 PHASE 60 HERTZ
    - 300 HP 1200 RPM 586/7Z FRAME 460/60 HERTZ SINGLE DRIVE ELECTRIC MOTOR
    STAINLESS STEEL BREATHER DRAINS INSTALLED FOR VERTICAL MOUNT SHAFT DOWN
    - SET OF FOUR (4) 6" X 24" STROKE DUAL PINNED HYDRAULIC RUN-ON JACKS AND GAS
    POWER
    - PAINTED GRAPHITE GRAY (RAL 7024) WITH SAFETY YELLOW HANDRAILS LADDERS AND
    GUARDING
    - AES ELECTRICAL SWITCHGEAR PANEL EQUIPPED AS PER BELOW:
    - 60X60 NEMA 3R/4 ENCLOSURE
    - DRIP SHIELD CORD CAGE
    - MANUALLY OPERATED SAFETY START UP ALARM
    - 800 AMP MAIN CIRCUIT BREAKER WITH LOCKABLE OPERATOR - ADJUSTED TO
    700 AMPS
    - IMPACTOR AMP METER AND HOUR METER
    - PLANT HZ METER
    - PLANT VOLT METER
    - ACS880 ABB BRAND VFD
    - POTENTIOMETER FOR SPEED CONTROL
    - 900 CFM HEAT EXCHANGER ON A SWITCH
    - CONTROL BUTTONS IN THE DOOR
    - 25 HP FEED CONVEYOR NEMA/IEC RATED SIZE 2 STARTER - 60 AMP
    RECEPTACLE AND PLUG - INTERLOCKED
    - 20 HP SPARE 1 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
    - 20 HP SPARE 2 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
    - 20 HP SPARE 3 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
    - 5 KVA TRANSFORMER WITH (1) 120 VAC 20 AMP GFCI DUPLEX -
    WEATHERPROOF
    - 60 AMP FEED BREAKER FOR CANICA POWER PANEL
    - VIBRATION SWITCH AND WIRING
    - VIBRATION INDICATOR LIGHT
    - HOUR METER
    - RPM GUAGE
    - LUBE STARTER AND CONTROLS
    - UNDER CRUSHER STARTER AND CONTROLS
    - 100- OF POWER CORD CONSISTING OF (2) PARALLEL RUNS OF 4/0 TYPE W PER
    PHASE QTY. (1) 4/0 TYPE W GROUND
    -GUARDING - WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL LOCAL CODES.IT IS
    THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED BY A LOCAL INSPECTOR