PrintClose   
                

Finlay I-120RS
General Equipment & Supplies, Inc.

Sales Department
3500 Apple Creek Road
Bismarck, North Dakota, 58504
USA
OFFICE +1 701 223-9700 FAX +1 (701) 223-4815
TOLL FREE (800) 279-4437
LANGUAGES SPOKEN English
Contact DealerSend to a FriendHotlist (1)Show All Pics (7)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Bismarck, North Dakota, USA
STOCK #E00056129SERIAL#TRX120RSLOML11882AVAILABLEImmediately
MAKEFinlayCATEGORYFor SalePRICE
745000 USD
745000
MODELI-120RSSTATUSOn Yard
YEAR2019CLASSUsed
NOTES
  • FINLAY I-120RS EQUIPPED AS PER BELOW:

    ENGINE
    - TIER 4 FINAL /STAGE IV : SCANIA DC9 257KW (350 HP) ENGINE

    IMPACT
    - TEREX CR038 IMPACT CHAMBER

    CHAMBER:
    - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
    - MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
    - 4 BAR ROTOR - MARTENSITIC BLOW BARS 2 HIGH & 2 LOW
    - DIRECT DRIVE VIA CLUTCH
    - DRIVE BELT TENSIONER WHEEL
    - BLOW BAR LIFTING TOOL SUPPLIED.
    - SMALLER ENGINE CHAMBER DRIVE PULLEYTO GIVE A ROTOR LOWER SPEED RANGE. STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE
    - ROTOR FITTED WITH 2 FULL MARTENSITIC CERAMIC & 2 LOW MARTENSITIC
    BLOW BARS

    HOPPER & FEEDER:
    - VGF FIXED HOPPER
    - STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
    - MESH APERTURE ON GRIZZLY FEEDER: 38MM
    - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
    - BLANKING MAT FOR VGF
    - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING
    HOPPERAND BLANKING MAT. 2" SQUARE OPENING SCREENS INSTALLED BLANKING MAT
    INSTALLED
    - INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS
    - BOFOR BARS REMOVED IN THE INDEPENDENT PRE-SCREEN


    MAIN CONVEYOR:
    - 1100MM (43.3") BELT FULL LENGTH
    - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED
    MAIN CONVEYOR)

    AUXILIARY CONVEYORS:
    - HYDRAULIC RAISE/ LOWER FOR MAGNET
    - PIPED FOR OVER BAND MAGNET
    - BYPASS CONVEYOR WITH 650MM WIDE PLAIN BELT DISCHARGING TO THE LHS OF THE
    MACHINE.
    - TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
    DISCHARGE CHUTE DISCHARGING TO RHS OF THE MACHINE.

    RS COMPONENTS:
    - 3.66M X 1.52M (12- X 5-) TWO DECK AFTER SCREEN C/W50MM TOP DECK AND 40MM
    BOTTOM DECK MESH AS STANDARD UNLESS OTHERWISE STATED
    - 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH
    DECKS.
    - 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
    FOR STOCKPILING OVERSIZE MATERIAL
    - 1400MM (55") WIDE BELT FINES CONVEYOR
    - RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY.
    - BELT WEIGHER
    - ADDITIONAL TRANSFER CONVEYOR FOR COLLECTING MATERIAL FROM EACH INDIVIDUAL DECK
    OF SCREEN BOX

    CLIMATE SPEC:
    - STANDARD OILS - (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30›¼°C)

    DUST SUPPRESSION:
    - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS
    - WATER PUMP FOR DUST SUPPRESSION

    ELECTRICAL:
    - EMERGENCY STOPS
    - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
    - T-LINK TELEMETRY SYSTEM FITTED C/W 3 YEARS DATA SUBSCRIPTION
    - RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK
    MOVEMENT
    - PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
    - LIGHTNING MAST

    SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE