FINLAY C-1540P TRACKED CONE CRUSHER EQUIPPED AS PER BELOW:
ENGINE:
- TIER 4 FINAL/STAGE IV: SCANIA DC09 257KW (350 HP)
CONE CHAMBER:
- TEREX TC1000 CONE CRUSHER
- LONG THROW ECCENTRIC MEDIUM COARSE CONCAVE (MAX FEED SIZE 160MM)
-HYDROSTATIC CONE DRIVE
FEED/CONVEYOR HOPPER:
- FIXED WEAR RESISTANT HOPPER
- 1050MM (42") WIDE BELT
- METAL DETECTOR & METAL CONTAMINANTS PURGE SYSTEM
- MANUAL HOPPER EXTENSIONS
MAIN CONVEYOR:
- 900MM (36") WIDE BELT
- DUST COVERS
PRE-SCREEN:
- 1.83M X 1.22M (6- X 4-) SINGLE DECK SCREEN.
- 16MM APERTURE MESH FITTED
- MAX FEED SIZE 160MM
- REQUIRES 1 AUXILIARY DRIVE
- SIDE CONVEYOR
CLIMATE SPEC:
- STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30 DEGREES
CELSIUS)
DUST SUPPRESSION:
- PIPED FOR DUST SUPPRESSION C/W SPRAYBARS PUMP NOT INCLUDED
ELECTRICAL:
- EMERGENCY STOPS
- HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
- RADIO REMOTE SYSTEM
- CONTROL PANEL POSITIVE AIR PRESSURIZATION
GENERAL:
- SAFETY GUARDS IN COMPLIANCE OF MACHINERY DIRECTIVE END USER TO HAVE GUARDING
INSPECTED
- TWO AUXILIARY DRIVES - (NOTE-SOME OPTIONS REQUIRE AN AUXILARY WHICH USE THESE)
FINLAY C-1540P TRACKED CONE CRUSHER EQUIPPED AS PER BELOW:
ENGINE:
- TIER 4 FINAL/STAGE IV: SCANIA DC09 257KW (350 HP)
CONE CHAMBER:
- TEREX TC1000 CONE CRUSHER
- LONG THROW ECCENTRIC MEDIUM COARSE CONCAVE (MAX FEED SIZE 160MM)
-HYDROSTATIC CONE DRIVE
FEED/CONVEYOR HOPPER:
- FIXED WEAR RESISTANT HOPPER
- 1050MM (42") WIDE BELT
- METAL DETECTOR & METAL CONTAMINANTS PURGE SYSTEM
- MANUAL HOPPER EXTENSIONS
MAIN CONVEYOR:
- 900MM (36") WIDE BELT
- DUST COVERS
PRE-SCREEN:
- 1.83M X 1.22M (6- X 4-) SINGLE DECK SCREEN.
- 16MM APERTURE MESH FITTED
- MAX FEED SIZE 160MM
- REQUIRES 1 AUXILIARY DRIVE
- SIDE CONVEYOR
CLIMATE SPEC:
- STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30 DEGREES
CELSIUS)
DUST SUPPRESSION:
- PIPED FOR DUST SUPPRESSION C/W SPRAYBARS PUMP NOT INCLUDED
ELECTRICAL:
- EMERGENCY STOPS
- HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
- RADIO REMOTE SYSTEM
- CONTROL PANEL POSITIVE AIR PRESSURIZATION
GENERAL:
- SAFETY GUARDS IN COMPLIANCE OF MACHINERY DIRECTIVE END USER TO HAVE GUARDING
INSPECTED
- TWO AUXILIARY DRIVES - (NOTE-SOME OPTIONS REQUIRE AN AUXILARY WHICH USE THESE)
Наличие и цена могут быть изменены до момента продажи. Спецификация изделия и его конфигурация могут быть изменены. Для проверки правильности информации, полученной на вебсайте, обращайтесь к продавцу.
Это бесплатное преобразование цены. Это может быть неточно, так как курсы конвертации валют меняются. При совершении покупки подразумевается первоначальная цена в национальной валюте.
Купеческий контакт
Поля, помеченные звездочкой (*) обязательны.
ценовое оповещение
Подпишитесь, чтобы получать уведомления об изменении цен на этот товар.
