FINLAY C-1540P TRACKED CONE CRUSHER EQUIPPED AS PER BELOW: ENGINE: - TIER 4 FINAL/STAGE IV: SCANIA DC09 257KW (350 HP) CONE CHAMBER: - TEREX TC1000 - LONG THROW ECCENTRIC MEDIUM COARSE CONCAVE (MAX FEED SIZE 160MM) 6" - HYDROSTATIC CONE DRIVE FEED CONVEYOR/HOPPER: - FIXED WEAR RESISTANT HOPPER - 1050MM (42") WIDE BELT - METAL DETECTOR & METAL CONTAMINANTS PURGE SYSTEM MAIN CONVEYOR: - 900MM (36") WIDE BELT - DUST COVERS PRE-SCREEN: - 1.83M X 1.22M (6- X 4-)SINGLE DECK SCREEN - 16MM APERTURE MESH FITTED UNLESS SPECIFIED OTHERWISE - MAX FEED SIZE 160MM - REQUIRES 1 AUXILIARY DRIVE - SIDE CONVEYOR CLIMATE SPEC: - STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30 DEG.C DUST SUPPRESSION: - PIPED FOR DUST SUPPRESSION C/W SPRAYBARS PUMP NOT INCLUDED ELECTRICAL: - EMERGENCY STOPS - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD - RADIO REMOTE SYSTEM - CONTROL PANEL POSITIVE AIR PRESSURIZATION GENERAL: - SAFETY GUARDS IN COMPLIANCE TO MACHINERY DIRECTIVE - TWO AUXILIARY DRIVE (NOTE - SOME OPTIONS REQUIRE AN AUXILARY WHICH USE THESE)