Posizione: North Jackson, Ohio, Stati Uniti d'America
Numero a magazzino: 37863
Classe: Nuova
Matricola: 211868
Anno: 2022
Marca: Virnig
Stato: In piazzale
Modello: SGV84
Disponibilità: Immediata
Dettagli
Modello:
SGV84
Note
v50 Skeleton Grapple
PRODUCT CATEGORY: Skid Steer
One of the most popular and versatile Virnig grapples used to handle brush, logs and debris.
EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY
NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
STANDARD WITH CYLINDER GUARDS
PRODUCT CATEGORY: Skid Steer
Need to get a grip? Virnig grapples rip out, pile, and carry debris with ease. Find out what else they can tackle!
V50 Skeleton Grapple: 36.1" Jaw opening-Overall width 85.5"-Height Overall 27.8"/bucket 21.3"-Overall depth 39.9"-Number of teeth 15-Space between tines 5.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylinder Pins 1.25"/Hinge Pins diameter 1.563"-Approx. Weight 955#-Recommended loader capacity greater than 1500#. Brand/Model: Bobcat
Two-cylinder independent grapple with an open sided design for hauling brush and logs. Open bottom allows dirt to fall through. Every tine is constructed from one piece of 1/2" grade 80 steel, from tip to top brace, to add rigidity. NitroSteel cylinder rods and Teflon coated bushings on all pivots.
**We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a Sales Associate prior to purchase.**
Posizione: North Jackson, Ohio, Stati Uniti d'America
Numero a magazzino: 37863
Classe: Nuova
Matricola: 211868
Anno: 2022
Marca: Virnig
Stato: In piazzale
Modello: SGV84
Disponibilità: Immediata
Dettagli
Modello:
SGV84
Note
v50 Skeleton Grapple
PRODUCT CATEGORY: Skid Steer
One of the most popular and versatile Virnig grapples used to handle brush, logs and debris.
EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY
NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
STANDARD WITH CYLINDER GUARDS
PRODUCT CATEGORY: Skid Steer
Need to get a grip? Virnig grapples rip out, pile, and carry debris with ease. Find out what else they can tackle!
V50 Skeleton Grapple: 36.1" Jaw opening-Overall width 85.5"-Height Overall 27.8"/bucket 21.3"-Overall depth 39.9"-Number of teeth 15-Space between tines 5.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylinder Pins 1.25"/Hinge Pins diameter 1.563"-Approx. Weight 955#-Recommended loader capacity greater than 1500#. Brand/Model: Bobcat
Two-cylinder independent grapple with an open sided design for hauling brush and logs. Open bottom allows dirt to fall through. Every tine is constructed from one piece of 1/2" grade 80 steel, from tip to top brace, to add rigidity. NitroSteel cylinder rods and Teflon coated bushings on all pivots.
**We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a Sales Associate prior to purchase.**
Questa è una conversione del prezzo di cortesia. Potrebbe non essere esatto in quanto cambiano i tassi di conversione della valuta. Quando si effettua un acquisto, è implicito il prezzo originale nella valuta nativa.
Commerciante Contattare
I campi contrassegnati da * (asterisco) sono obbligatori.
Avviso Prezzo
Iscriviti per essere informato sulle variazioni di prezzo di questo articolo.