NEW ASHLAND 220TS4 SCRAPER-20 CUBIC YARD CAPACITY-10'6" CUTTING WIDTH. UPGRADED RADIAL 20.5R2 TIRES. Rear Hydraulic,Standard 1.5" Pin Additional Setup Options: 60 MM for +$1,850,Rear 1.5" Quick hitch Option for +$3,500,Rear 60MM Quick Hitch for rear +$4,000 BORN IN THE DIRT Contractors are a special breed. You live your work and expect the equipment you buy to work harder than you do. That’s what makes the 220TS4 unique – it was built by engineers and skilled craftsman who have spent their lives working in the dirt searching for solutions to allow you to Do More. Features may include: Hitch System: By running your tractors drawbar pin horizontally thru the hitch’s two ears,your scraper can be mounted closer to the tractor's rear axle,which helps keep the front of MFWD tractor weighed down. The drawbars vertical pin is mounted 22” behind the horizontal drawbar pin,which provides you with a superior turning radius. Over engineered with higher strength material and additional support gussets. Heavy steel bulkhead and ridged hose stand keep hydraulic lines safe and secure. Front Section: Vertically mounted 5.5" x 20" friction welded trunnion mount cylinders with a nitro bar rod are attached directly over the blade set. These cylinders are mounted in a nearly vertical position so that when the operator retracts the cylinder one inch,the blade moves one inch. This enables you to maintain greater control of engine RPMs and ground speed. By moving faster,the dirt continues to “boil,” developing bigger and quicker loads. Ashland utilizes a thick walled 16” round front section pipe for the 220TS4. A standard hydraulic accumulator provides a smoother ride by absorbing shock loads while transporting fully loaded scrapers. This adds protection for both the scraper and the tractor without the need for any additional plumbing. The Pole is box built with an internal skeleton vs. formed halves to increase rigidity. The tapered trailing arm has excellent depth of frame near the front pipe to reduce failure a