Modell:
S680
33 Fotos
-
Klicken Sie hier, um alle anzuzeigen
Zusätzliche Informationen
-
Standort: Findlay, Ohio, Vereinigte Staaten
-
Inventar Nummer: FN000992
-
Klassifizierung: Gebraucht
-
Seriennummer: 1H0S680SLD0755750
-
Baujahr: 2013
-
Marke: John Deere
-
Status: Auf Der Baustelle
-
Modell: S680
-
Verfügbarkeit: Sofort
Einzelheiten
Geschätzte Motorbetriebsstunden:
1883
Betriebsstunden Der Trennvorrichtung:
1291
Anmerkungen
- PREMIUM CAB AND RADIO HID LIGHTS & EXTREMITY AUTOTRAC READY/HARV MONITOR GS3 2630 MOUNTED ON ARM REST PRO DRV TRANS W/HARVESTSMART 2 WHEEL DRIVE COMMAND TOUCH MULTI SPD DRV S-SERIES CLEANING SHOE CUSTOM CUTTER EXT WEAR PKG 7.9M UNLOADING AUGER MANUAL ADJUST VANE TAILBOARD 28LR26 169A8 R1W GY 520/85R42 R1WDUAL 162A8 ITIER 4 ENGINE CLN GR AUG & FAN BOTM PROTEC 110V COOLANT HTR NO EXPORT 16IN (400MM)AXLE SPACER FULL GRAIN TANK SENSOR ***MACHINE FULLY INSPECTED AND FIELD READY. OVER $9,000 IN PARTS WERE PUT ON THIS MACHINE, NOT INCLUDING LABOR. THE FOLLOWING REPAIRS BELOW WERE MADE Replaced feeder house drive chain and idler, and bracket. Replaced feeder house conveyor chain plastic wear strips. Replaced broken front chaffer element. Replaced 4 chaffer frame dog bones. Replaced sieve electric harness to sieve motor because it was broken. Replaced rubber seal on stone trap door. Replaced rotary screen drive belt and idler. Replaced lower tailings elevator door. Replaced all sprockets, bearings, and chain on Active Tailings. Replaced concave Zbar, leveled concaves, calibrate. Replaced feeder house drive belt. Replaced both tie rods. Replaced plastic impact plate on mass flow sensor. Replaced cleaning fan bearings and flanges. Replaced secondary jackshaft belt. Replaced both final drive pinion seals. Changed engine oil and filter. Changed hydraulic oil and filters. Changed Pro Drive filter. Changed MEG oil and filter. Replaced clean grain elevator chain, sprockets, shaft, bearings, and flanges. Replaced variable fan sheave halves. *****
- Combine Type Corn/Bean
- Duals/Singles Singles
- Chopper/Spreader Chopper
- Options Yield Monitor
- Header No
- Premium Cab with Premium Radio
- HID Lighting Package and Header Extremity Lights
- AutoTrac Ready with Harvest Monitor
- GreenStar 3 2630 Display (mounted on armrest)
- ProDrive Transmission with Harvest Smart Feedrate Control
- 2-Wheel Drive
- 185 kW CommandTouch Multi-Speed Drive System - Heavy Duty Tilt Cylinder - 3.50 In. (90 MM) Lift Cylinders
- Small Wire Concave
- S-Series Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet
- Custom Cutter Extended Wear Separation and Concave Package
- 26 Ft. (7.9 M) Unloading Auger
- Manual Adjust Vane Tailboard
- 28LR26 (Goodyear Only) or 750/65R26 (Firestone or Michelin)
- Interim Tier 4 Engine
- Clean Grain Auger and Fan Bottom Protection Shielding
- Engine Coolant Heater - 110 Volt (Not available for Export)
- 16 In. (400 MM) Axle Spacer
- Additional "Full" Grain Tank Sensor
- Axle 2WD
2013 John Deere S680
Gebraucht
Mähdrescher
Verkauf
Vertriebskontakte
33 Fotos
Zusätzliche Informationen
-
Standort: Findlay, Ohio, Vereinigte Staaten
-
Inventar Nummer: FN000992
-
Klassifizierung: Gebraucht
-
Seriennummer: 1H0S680SLD0755750
-
Baujahr: 2013
-
Marke: John Deere
-
Status: Auf Der Baustelle
-
Modell: S680
-
Verfügbarkeit: Sofort
Einzelheiten
Modell:
S680
Geschätzte Motorbetriebsstunden:
1883
Betriebsstunden Der Trennvorrichtung:
1291
Anmerkungen
- PREMIUM CAB AND RADIO HID LIGHTS & EXTREMITY AUTOTRAC READY/HARV MONITOR GS3 2630 MOUNTED ON ARM REST PRO DRV TRANS W/HARVESTSMART 2 WHEEL DRIVE COMMAND TOUCH MULTI SPD DRV S-SERIES CLEANING SHOE CUSTOM CUTTER EXT WEAR PKG 7.9M UNLOADING AUGER MANUAL ADJUST VANE TAILBOARD 28LR26 169A8 R1W GY 520/85R42 R1WDUAL 162A8 ITIER 4 ENGINE CLN GR AUG & FAN BOTM PROTEC 110V COOLANT HTR NO EXPORT 16IN (400MM)AXLE SPACER FULL GRAIN TANK SENSOR ***MACHINE FULLY INSPECTED AND FIELD READY. OVER $9,000 IN PARTS WERE PUT ON THIS MACHINE, NOT INCLUDING LABOR. THE FOLLOWING REPAIRS BELOW WERE MADE Replaced feeder house drive chain and idler, and bracket. Replaced feeder house conveyor chain plastic wear strips. Replaced broken front chaffer element. Replaced 4 chaffer frame dog bones. Replaced sieve electric harness to sieve motor because it was broken. Replaced rubber seal on stone trap door. Replaced rotary screen drive belt and idler. Replaced lower tailings elevator door. Replaced all sprockets, bearings, and chain on Active Tailings. Replaced concave Zbar, leveled concaves, calibrate. Replaced feeder house drive belt. Replaced both tie rods. Replaced plastic impact plate on mass flow sensor. Replaced cleaning fan bearings and flanges. Replaced secondary jackshaft belt. Replaced both final drive pinion seals. Changed engine oil and filter. Changed hydraulic oil and filters. Changed Pro Drive filter. Changed MEG oil and filter. Replaced clean grain elevator chain, sprockets, shaft, bearings, and flanges. Replaced variable fan sheave halves. *****
- Combine Type Corn/Bean
- Duals/Singles Singles
- Chopper/Spreader Chopper
- Options Yield Monitor
- Header No
- Premium Cab with Premium Radio
- HID Lighting Package and Header Extremity Lights
- AutoTrac Ready with Harvest Monitor
- GreenStar 3 2630 Display (mounted on armrest)
- ProDrive Transmission with Harvest Smart Feedrate Control
- 2-Wheel Drive
- 185 kW CommandTouch Multi-Speed Drive System - Heavy Duty Tilt Cylinder - 3.50 In. (90 MM) Lift Cylinders
- Small Wire Concave
- S-Series Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet
- Custom Cutter Extended Wear Separation and Concave Package
- 26 Ft. (7.9 M) Unloading Auger
- Manual Adjust Vane Tailboard
- 28LR26 (Goodyear Only) or 750/65R26 (Firestone or Michelin)
- Interim Tier 4 Engine
- Clean Grain Auger and Fan Bottom Protection Shielding
- Engine Coolant Heater - 110 Volt (Not available for Export)
- 16 In. (400 MM) Axle Spacer
- Additional "Full" Grain Tank Sensor
- Axle 2WD
Verfügbarkeit und Preis, vorbehaltlich von Änderungen und vorzeitigem Verkauf.
Teilen
SMS
Email
Facebook
Twitter
Pinterest
reddit
Tumblr
WhatsApp
Blogger
More
Preisumrechnung
Dies ist eine höfliche Preisumrechnung. Es ist möglicherweise nicht genau, da sich die Währungsumrechnungskurse ändern. Beim Kauf wird der Originalpreis in der Landeswährung impliziert.
Kontakt-Händler
Felder, die mit einem Sternchen (*) versehen sind, müssen ausgefüllt werden.
Preis Alarm
Abonnieren Sie, um über Preisänderungen dieses Artikels informiert zu werden.