One of the most popular and versatile Virnig grapples used to handle brush, logs and debris.
EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY
NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
STANDARD WITH CYLINDER GUARDS
PRODUCT CATEGORY: Skid Steer
Need to get a grip? Virnig grapples rip out, pile, and carry debris with ease. Find out what else they can tackle!
V50 Skeleton Grapple: 36.1" Jaw opening-Overall width 85.5"-Height Overall 27.8"/bucket 21.3"-Overall depth 39.9"-Number of teeth 15-Space between tines 5.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylinder Pins 1.25"/Hinge Pins diameter 1.563"-Approx. Weight 955#-Recommended loader capacity greater than 1500#. Brand/Model: Bobcat
Two-cylinder independent grapple with an open sided design for hauling brush and logs. Open bottom allows dirt to fall through. Every tine is constructed from one piece of 1/2" grade 80 steel, from tip to top brace, to add rigidity. NitroSteel cylinder rods and Teflon coated bushings on all pivots.
**We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a Sales Associate prior to purchase.**
One of the most popular and versatile Virnig grapples used to handle brush, logs and debris.
EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY
NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
STANDARD WITH CYLINDER GUARDS
PRODUCT CATEGORY: Skid Steer
Need to get a grip? Virnig grapples rip out, pile, and carry debris with ease. Find out what else they can tackle!
V50 Skeleton Grapple: 36.1" Jaw opening-Overall width 85.5"-Height Overall 27.8"/bucket 21.3"-Overall depth 39.9"-Number of teeth 15-Space between tines 5.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylinder Pins 1.25"/Hinge Pins diameter 1.563"-Approx. Weight 955#-Recommended loader capacity greater than 1500#. Brand/Model: Bobcat
Two-cylinder independent grapple with an open sided design for hauling brush and logs. Open bottom allows dirt to fall through. Every tine is constructed from one piece of 1/2" grade 80 steel, from tip to top brace, to add rigidity. NitroSteel cylinder rods and Teflon coated bushings on all pivots.
**We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a Sales Associate prior to purchase.**
Dette er en høflig prisomregning. Det er muligvis ikke nøjagtigt, da valutaomregningskurserne ændres. Når du foretager et køb, er den oprindelige pris i den oprindelige valuta underforstået.
Contact Dealer
Felter markeret med en stjerne (*) skal udfyldes.
Pris Alarm
Abonner for at få besked om prisændringer på denne vare.