NEW H&S HC4112 HI-Capacity Wheel Rake The H&S HC4112 HI-CAPACITY wheel rake has the raking wheels positioned ahead of the rake arms, main frame beams, and transport wheels. With a high and wide rear frame, there are no hang-up points or restrictions when raking the heaviest of hay crops. The windrow width adjustment is done with a hand crank and adjusts windrows from 38″ to 58″ width. Independent articulated rake beams have the flexibility to flex 3′ up or 3′ down. Raking widths can be hydraulically adjusted in any position to a pre-determined raking width up to 24′ The HI-CAPACITY rake opens and closes hydraulically, rake wheels are lowered and raised hydraulically, and the rake wheels float independently. The HC4112 folds up to 8′ 6″ or less with the touch of a lever for road transport or to go through gates. A single point rake wheel down pressure adjustment on each rake beam allows the operator to fine tune the rake to fit varying conditions. An adjustable brake band on top of the front spindle keeps the front gauge wheels from spinning in rough conditions.