EquipmentLocator.com
1 Photo
Details
Model:
4100
Est Hours:
72000
Notes
Bucket: P&H Bail-less 73 cubic yard 9-tooth bucket is installed on the machine. (Bucket measurements: 9’ 2” high x 13’ 4” x 16’4” door to adapter.) Snub Rite snubbers are installed. (Bucket dimensions are inside measurements). Track pads are 86 ½ “ wide and in good condition; installed 2011. Front idlers,lower roller and drive sprockets were replaced at same time as track pads. House A fire suppression system is installed and is still commissioned. Two Atlas Copco screw compressors Model GA22are installed. The inside areas of the house are clean,with no evidence of oil leaks. The automatic lubrication system is standard but has a bulk tank on board which is recharged from ground level from a service truck. Safety harness hook-up points have been installed where necessary throughout the machine. A pneumatic activated boarding ladder has been installed to right side of machine. P&H Sigma air conditioner is installed and is in good condition. Upper deck All walkways,handrails and guarding complies with statutory requirement and is in good condition. Boom to gantry suspension ropes are bridge strand and appear to be in good condition. Trip system has an upgraded Trip Rite system installed. Stainless steel shrouds have been installed to all gantry legs where they go through roof structure. Component History ITEM DATA Into Service 2002 Frame hours 71,534 Component hours: Date Last Changed Replaced Boom point sheave Assy 6/18/2012 Front hoist motor 3/08/2010 Rear hoist motor 2/13/ 2012 Crowd motor 2/13/ 2012 Front swing motor 2/ 6/ 2012 Rear swing motor 5/23/2011 Right propel motor 10/30/2010 Left propel motor 1/25/2010 Hoist gear case front input pinion 8/21/2011 Crowd gearcase overhaul 2/13/2012 Front swing transmission 4/23/2012 Rear swing transmission 5/23/2011 Right propel transmission-Shaft-Tumbler 8/30/2011 Left propel transmission 1/25/2010 Rack,rollers,rails 8/17/2010 Undercarriage RHS 8/18/2011 Replaced R/F Idler assembly 3/12/2012 Undercarriage LHS 8/18/2011 Replaced hoist ropes 2/13/2012 Dipper 7/18/2011 Installed Snub Rite snubbers to dipper 18/6/2012 Boom & dipper configuration bucket size Standard 73 yard dipper Pad width and undercarriage good condition 86 inch Replaced 2011,AdditionalCategory: Excavators - Crawler,ROPS: Enclosed

2002 P & H 4100

Used
Excavator-Track
For Sale
Call for Price

Sales Contacts

Details
Model:
4100
Est Hours:
72000
Notes
Bucket: P&H Bail-less 73 cubic yard 9-tooth bucket is installed on the machine. (Bucket measurements: 9’ 2” high x 13’ 4” x 16’4” door to adapter.) Snub Rite snubbers are installed. (Bucket dimensions are inside measurements). Track pads are 86 ½ “ wide and in good condition; installed 2011. Front idlers,lower roller and drive sprockets were replaced at same time as track pads. House A fire suppression system is installed and is still commissioned. Two Atlas Copco screw compressors Model GA22are installed. The inside areas of the house are clean,with no evidence of oil leaks. The automatic lubrication system is standard but has a bulk tank on board which is recharged from ground level from a service truck. Safety harness hook-up points have been installed where necessary throughout the machine. A pneumatic activated boarding ladder has been installed to right side of machine. P&H Sigma air conditioner is installed and is in good condition. Upper deck All walkways,handrails and guarding complies with statutory requirement and is in good condition. Boom to gantry suspension ropes are bridge strand and appear to be in good condition. Trip system has an upgraded Trip Rite system installed. Stainless steel shrouds have been installed to all gantry legs where they go through roof structure. Component History ITEM DATA Into Service 2002 Frame hours 71,534 Component hours: Date Last Changed Replaced Boom point sheave Assy 6/18/2012 Front hoist motor 3/08/2010 Rear hoist motor 2/13/ 2012 Crowd motor 2/13/ 2012 Front swing motor 2/ 6/ 2012 Rear swing motor 5/23/2011 Right propel motor 10/30/2010 Left propel motor 1/25/2010 Hoist gear case front input pinion 8/21/2011 Crowd gearcase overhaul 2/13/2012 Front swing transmission 4/23/2012 Rear swing transmission 5/23/2011 Right propel transmission-Shaft-Tumbler 8/30/2011 Left propel transmission 1/25/2010 Rack,rollers,rails 8/17/2010 Undercarriage RHS 8/18/2011 Replaced R/F Idler assembly 3/12/2012 Undercarriage LHS 8/18/2011 Replaced hoist ropes 2/13/2012 Dipper 7/18/2011 Installed Snub Rite snubbers to dipper 18/6/2012 Boom & dipper configuration bucket size Standard 73 yard dipper Pad width and undercarriage good condition 86 inch Replaced 2011,AdditionalCategory: Excavators - Crawler,ROPS: Enclosed
View Dealer Page

GDT Trading Ltd

Address
PO BOX 53011
Edmonton, Alberta T5N 2L4
Canada
TollFree: 888-443-3777
DirectLine: 780-443-3777
Fax: 780-443-4228
Languages Spoken: English
Availability and price subject to change and/or prior sale. Specifications and equipment configuration is subject to change. Please consult a sales professional to ensure that website information is correct and up-to-date.

Share

SMS
Email
Facebook
Twitter
Pinterest
reddit
Tumblr
WhatsApp
Blogger
More

Price Conversion

This is a courtesy price conversion. It may not be exact as the currency conversion rates change. When making a purchase, the original price in the native currency is implied.

Contact Dealer


Fields marked with an * (asterisk) are required.

Price Watch


Subscribe to be notified of price changes on this item.

Send us a message (optional)
Languages
North America
English Español Français
Latin America
English Español Português
Asia Pacific
English 中文