Tree Puller

Quickly remove trees, fence posts and other objects.

• HARD STOP ALLOWS SMALL TREES TO BE PULLED WITHOUT SHEARING THEM OFF
• STANDARD WITH CYLINDER GUARD
• NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS

PRODUCT CATEGORY: Skid Steer

 

WHAT SIZE TREES CAN THE TREE PULLER PULL OUT?

The jaws open 11 ½”, but the maximum size of tree that can be removed will vary greatly depending on the size of the skid steer, type of tree, and ground conditions.

WHAT IS THE THICKNESS OF THE TEETH ON THE JAW? WHY ISN’T IT THICKER?

1/2” Grade 80 laser cut steel. Others often use use A36 steel. Grade 80 steel has a yield strength 2.2 times that of A36 steel. Additionally, every other tooth is gusseted to provide rigidity. These attributes allow the Virnig Tree Puller jaw to outperform inferior steel designs, even if they are thicker.

CAN I PULL OUT SMALL TREES WITHOUT SHEARING THEM OFF?

Yes, there is a hard stop at the tip of the jaw of the tree puller, leaving a small space between the teeth.

Tree Puller: Overall Width 47"-Overall height 22"-Overall depth 37.3"-Jaw opening 11.5" to quickly pull out trees and fence post-Cylinder bore 2"/Stroke 8.375"-Cylinder pins 1.25"/Pivot pins 1.563"-Approx. weight 465#-Recommended loader capacity greater than 1500#. Brand/Model: Bobcat Hard stop at tip keeps small space between teeth when fully closed. This allows even small trees to be pulled without shearing them off. Single hydraulic cylinder is protected from debris and other objects. Corrosion, dent and flake resistant NitroSteel cylinder rod. NitroSteel cylinder rod and Treflon coated bushings on all pivots. **We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a Sales Associate prior to purchase.