6 Bat / 20 ft. / 25 ft. / 30 ft. / 35 ft.
Condition: Excellent 3" Course cut
30.00 FEET
BASE HEADER: : Single lever
quick attach header
Single point/single lever
hydraulic coupler
Single point electrical wiring coupler
AUGER:
Cross auger 26 in. (660 mm) dia.
with high strength center section
5 in. (127 mm) deep flighting
Retractable auger fingers
full length of auger with breakaway
design
Auger fingers use click pins for quick
easy replacement
Auger stripper bars
DRIVES:
Telescoping drive lines with 60° of
free rotation and integral torque
limiter on auger driveline
Single speed drive sprocket provides
147 rpm auger speed
Header drivelines are lateral tilt ready
REEL:
Hydraulic reel drive with chain reduction
Hydraulic reel lift with extended lift
hydraulic cylinders
Hydraulic reel fore/aft control
Fore/Aft reel position sensors
NOTE: Be aware that aftermarket reels
both conventional and air driven may
require modification for proper
operation on this header.
CUTTERBAR:
Knife with coarse serrated bolt on
sections
Heavy-duty knife guards with adjustable
hold downs
Single Oil bath knife drive gearcase
575 CPM (cycles per minute)
AUTOMATIC HEADER HEIGHT:
Automatic Header Height Control
and Lateral Tilt with sensors
MISCELLANEOUS:
Peripheral header lighting with
reflective material
Additional knife storage location in
lower beam
Full width Skid Plates with UHMW
polyethylene skid shoes
Hinged knife and auger drive end
shields
Case IH Standard Warranty Applies
WEIGHTS: (estimate)
20 ft. - Single - 4
242 lbs. (1924 kg)
25 ft. - Single - 5
302 lbs. (2405 kg)
30 ft. - Double - 6
562 lbs. (2976 kg)
35 ft. - Double - 6
960 lbs. (3157 kg)
3020 FLEX HEAD CUR
3" Course cut standard_guard / CUTTERBAR 3 INCH STD GUARD LAR
Manual cutterbar suspension / standard
Medium divider standard / Medium divider and supports standard
No crop divider rods
KNIFE 3IN COARSE in base / No knife opener package
No auger stripper bars
No header height control / No rigid header height control
6 Bat / 20 ft. / 25 ft. / 30 ft. / 35 ft.
Condition: Excellent 3" Course cut
30.00 FEET
BASE HEADER: : Single lever
quick attach header
Single point/single lever
hydraulic coupler
Single point electrical wiring coupler
AUGER:
Cross auger 26 in. (660 mm) dia.
with high strength center section
5 in. (127 mm) deep flighting
Retractable auger fingers
full length of auger with breakaway
design
Auger fingers use click pins for quick
easy replacement
Auger stripper bars
DRIVES:
Telescoping drive lines with 60° of
free rotation and integral torque
limiter on auger driveline
Single speed drive sprocket provides
147 rpm auger speed
Header drivelines are lateral tilt ready
REEL:
Hydraulic reel drive with chain reduction
Hydraulic reel lift with extended lift
hydraulic cylinders
Hydraulic reel fore/aft control
Fore/Aft reel position sensors
NOTE: Be aware that aftermarket reels
both conventional and air driven may
require modification for proper
operation on this header.
CUTTERBAR:
Knife with coarse serrated bolt on
sections
Heavy-duty knife guards with adjustable
hold downs
Single Oil bath knife drive gearcase
575 CPM (cycles per minute)
AUTOMATIC HEADER HEIGHT:
Automatic Header Height Control
and Lateral Tilt with sensors
MISCELLANEOUS:
Peripheral header lighting with
reflective material
Additional knife storage location in
lower beam
Full width Skid Plates with UHMW
polyethylene skid shoes
Hinged knife and auger drive end
shields
Case IH Standard Warranty Applies
WEIGHTS: (estimate)
20 ft. - Single - 4
242 lbs. (1924 kg)
25 ft. - Single - 5
302 lbs. (2405 kg)
30 ft. - Double - 6
562 lbs. (2976 kg)
35 ft. - Double - 6
960 lbs. (3157 kg)
3020 FLEX HEAD CUR
3" Course cut standard_guard / CUTTERBAR 3 INCH STD GUARD LAR
Manual cutterbar suspension / standard
Medium divider standard / Medium divider and supports standard
No crop divider rods
KNIFE 3IN COARSE in base / No knife opener package
No auger stripper bars
No header height control / No rigid header height control
Availability and price subject to change and/or prior sale. Specifications and equipment configuration is subject to change. Please consult a sales professional to ensure that website information is correct and up-to-date.
This is a courtesy price conversion. It may not be exact as the currency conversion rates change. When making a purchase, the original price in the native currency is implied.
Contact Dealer
Fields marked with an * (asterisk) are required.
Price Watch
Subscribe to be notified of price changes on this item.