ZX50U-5N HYDRAULIC EXCAVATOR EQUIPPED PER THE BELOW: ENGINE: - YANMAR 4TNV88 (2.19 L) - 36.5 SAE NET HP (27.2KW) - CERTIFIED TO EPA FINAL TIER 4 EMISSIONS - SINGLE DRY-TYPE AIR FILTER - ELECTRIC FUEL SHUTOFF - FAN GUARD - FULL FLOW OIL FILTER - UNDER HOOD MUFFLER - 55 AMP ALTERNATOR - 12 VOLT HYDRAULICS: - CLOSED-CENTER LOAD-SENSING WITH ONE VARIABLE - DISPLACEMENT PUMP AND ONE FIXED GEAR PUMP - HYDRAULIC PILOT CONTROLS FOR BOOM ARM BUCKET SWING BOOM SWING BLADE AND AUXILIARY - EXCAVATOR TO BACKHOE CONTROL PATTERN CHANGE VALVE - AUXILIARY FUNCTION CONTROL AND RIGHT HAND PILOT LEVER - BOOM SWING FOOT CONTROL AXIAL PISTON SWING MOTOR - WET DISK SWING BRAKE - AUXILIARY VALVE SECTION - AUXILIARY HYDRAULIC LINES WITH RELEASE UNDER PRESSURE - AUXILIARY HYDRAULIC LINES WITH A SELECTOR VALVE TO THE ARM - UNDERCARRIAGE - 16 IN. (400 MM) RUBBER TRACK - PROPEL MOTOR SHIELD - PLANETARY FINAL DRIVE - TWO SPEED PROPELWITH AUTOMATIC SHIFTING - AXIAL PISTON PROPEL MOTOR UPPERSTRUCTURE: - ZERO TAIL SWING CONFIGURATION - 360 DEGREE UPPER STRUCTURE ROTATION - INDEPENDENT BOOM SWING (80 DEGREE LEFT AND 60 DEGREE RIGHT ROTATION) - ROPS/FOPS CABIN - TOOLBOX - VANDAL LOCKS FOR SERVICE DOORS - WORK LIGHTS - ONE MOUNTED ON CANOPY (CAB) - ONE MOUNTED ON BOOM - COUNTERWEIGHT 1 543 LB. (700 KG.) FRONT ATTACHMENTS: - BOOM 9 FT. 4 IN. (2.9 M) - ARM 5 FT. 7 IN. (1.38 M) - 6 FT. 7 IN. (2.0 M) BACKFILL BLADE - MECHANICAL QUICK COUPLER OPERATOR-S STATION: - CAB AIR/HEAT - ELECTRONIC THROTTLE CONTROL WITH AUTO IDLE - VINYL SEAT WITH FORE/AFT ADJUSTMENT - 2 IN. RETRACTABLE SEAT BELT - HORN - HOUR METER - INSTRUMENTATION LIGHTS - MONITOR SYSTEM WITH ENGINE PREHEAT INDICATOR - ENGINE OIL PRESSURE INDICATOR - ALTERNATOR VOLTAGE INDICATOR - FUEL GAUGE AND LEVEL INDICATOR - ENGINE COOLANT TEMPERATURE GAUGE AND INDICATOR - HOUR METER - WORK LIGHTSINDICATOR - WORK LIGHTS SWITCH - FOLDABLE PROPEL PEDALS AND LEVERS - TWO TRAVEL MODES WITH AUTOMATIC SHIFTING AND SPEED SELECTION SWITCH - MOTION ALARM WITH CANCEL SWITCH - CUPHOLDER - 12 VOLT CELL PHONE OUTLET