Virnig v60 Hydraulic Snow Blade / Pusher

Industrial plow with independent blade and wing control for optimal snow removal.

• FREE FLOATING DESIGN AUTOMATICALLY ADAPTS TO UNEVEN GROUND IN ALL DIRECTIONS WHILE ALLOWING FULL DOWN PRESSURE
• DUAL HYDRAULIC CROSSOVER RELIEF VALVES PROTECT THE ATTACHMENT BY ANGLING THE BLADE UPON IMPACT
• INDEPENDENTLY ANGLE EACH WING 60° & ANGLE THE BLADE 30° LEFT OR RIGHT, FROM INSIDE THE CAB
• POSITION BLADE & WINGS AT ANY POINT BETWEEN THOSE SHOWN BELOW
• TRIP EDGES ON MAIN BLADE & WINGS PROTECT OPERATOR & EQUIPMENT
• REVERSIBLE, HARDENED MAIN EDGE & AR400 WING EDGES INCREASE DURABILITY & ALLOW 5 1/2″ OF WEAR

 

V60 Hydraulic Snow Blade/Pusher Combo: Overall width, straight 148.5"-Width at full angle, both wings open 131"-Width at full angle, one wing open 107"-Width at full scoop 120.5"-Main moldboard width 86"-Overall height 31"-Overall depth, straight 39.5"-Moldboard thickness 0.19"-Cylinder bore 2"/Stock 8.375"-Cylinder pins 1.25"/Hinge pins diameter 1.563"-Approx weight 1650#-Recommended loader capacity greater than 1,800# 7 pin electric control for Bobcat Canbus Gen 2 Basic blade configurations. Pressure relief valves. Trip edge protection. Floating frame link. Side to side oscillation **We believe these specifications to be accurate. Any discrepancies are unintentional. Please verify information with a Sales Associate prior to purchase.**