EquipmentLocator.com

Yoder & Frey May 9th Auction, Houston, TEXAS

Dettagli
Modello:
FARMALL 75C
Note
  • 2MMV+DIV w/Joystick New Trim / 2 mid-mount valves
  • joystick
  • and 3rd function / switch with diverter valve
  • l620 loader on unit Condition: Excellent l620 loader on unit DIESEL ENGINE:
    :
    Farmall 75C
    74 Gross Engine hp
    64 PTO hp @ 2300 rpm
    4 Cyl Turbocharged Engine
    195 cu in (3.4 L) Displacement

    US EPA Tier IV Emissions Compliant
    Bosch Fuel Injection Pump
    Electric Engine Shutoff
    Hand and Foot Throttle Controls
    Grid Heater Starting Aid
    Air Cleaner: Dry Type with Safety
    Element
    Fuel Sediment Filter with Water Sensor
    23.8-gallon (90L) Fuel Tank with
    Bottom Protection Shield

    EXHAUST:
    Under Hood Muffler with Vertical
    Exhaust

    TRANSMISSION:
    11 Inch Clutch
    Floor-mounted LH side Mechanical
    Shuttle
    (4) Synchronized Gears
    (2) Non-synchronized Ranges
    12 Forward and 12 Reverse Speeds
    Forward Reverse Synchronized Shuttle
    19 mph (30 kph) top speed
    Speed varies with tire selection
    Park Lock on Range Lever

    AXLES:
    MFD Front Axle:
    Electro-Hydraulic MFD Engagement
    Adjustable Tread Width from 60.8 in.
    to 76.6 in.
    Limited Slip Differential Lock
    Standard FAS Ready

    AXLES: (Continued)
    Rear Axle:
    Flange Type
    Adjustable Tread Width 52.2 - 76.0 in.
    Rear Differential Lock - MFD
    mechanically engaged

    TIRES:
    Front MFD tires - 11.2-24 R1
    Rear MFD tires - 16.9-30 R1

    HYDRAULIC SYSTEM:
    Open Center System - (1) Open
    Center Remote Valve with detent
    Dual Gear Pumps
  • (2) Couplers
    Implement Pump: 12.5 gpm (47.5 L)
    Steering Pump: 7.3 gpm (27.5 L)
    Total Flow: 19.8 gpm (75L)

    PTO:
    540 rpm Mechanical PTO
    (1-3/8 in. 6 splines)
    Fully Independent
  • dry clutch
    Mechanical Engagement
    Flip-up PTO Shaft Guard

    HITCH:
    3-point Category II with flex lower links
    and telescoping stabilizers
    3664 lbs. Lift Capacity (SAE)
    Swinging Drawbar
    Mechanical Draft Control
    Upper Link Draft Sensing

    STEERING/BRAKES:
    Hydrostatic Power Steering
    Brakes- Hydraulic assist wet brakes

    INSTRUMENTATION:
    Analog Instrumentation with warning
    lights for air cleaner service

  • alternator
  • oil pressure
  • fuel sediment
    and water sensor

2023 Case IH FARMALL 75C

Nuova
Trattori
In Vendita
$82.800,00 USD

Contatti di vendita

Dettagli
Modello:
FARMALL 75C
Note
  • 2MMV+DIV w/Joystick New Trim / 2 mid-mount valves
  • joystick
  • and 3rd function / switch with diverter valve
  • l620 loader on unit Condition: Excellent l620 loader on unit DIESEL ENGINE:
    :
    Farmall 75C
    74 Gross Engine hp
    64 PTO hp @ 2300 rpm
    4 Cyl Turbocharged Engine
    195 cu in (3.4 L) Displacement

    US EPA Tier IV Emissions Compliant
    Bosch Fuel Injection Pump
    Electric Engine Shutoff
    Hand and Foot Throttle Controls
    Grid Heater Starting Aid
    Air Cleaner: Dry Type with Safety
    Element
    Fuel Sediment Filter with Water Sensor
    23.8-gallon (90L) Fuel Tank with
    Bottom Protection Shield

    EXHAUST:
    Under Hood Muffler with Vertical
    Exhaust

    TRANSMISSION:
    11 Inch Clutch
    Floor-mounted LH side Mechanical
    Shuttle
    (4) Synchronized Gears
    (2) Non-synchronized Ranges
    12 Forward and 12 Reverse Speeds
    Forward Reverse Synchronized Shuttle
    19 mph (30 kph) top speed
    Speed varies with tire selection
    Park Lock on Range Lever

    AXLES:
    MFD Front Axle:
    Electro-Hydraulic MFD Engagement
    Adjustable Tread Width from 60.8 in.
    to 76.6 in.
    Limited Slip Differential Lock
    Standard FAS Ready

    AXLES: (Continued)
    Rear Axle:
    Flange Type
    Adjustable Tread Width 52.2 - 76.0 in.
    Rear Differential Lock - MFD
    mechanically engaged

    TIRES:
    Front MFD tires - 11.2-24 R1
    Rear MFD tires - 16.9-30 R1

    HYDRAULIC SYSTEM:
    Open Center System - (1) Open
    Center Remote Valve with detent
    Dual Gear Pumps
  • (2) Couplers
    Implement Pump: 12.5 gpm (47.5 L)
    Steering Pump: 7.3 gpm (27.5 L)
    Total Flow: 19.8 gpm (75L)

    PTO:
    540 rpm Mechanical PTO
    (1-3/8 in. 6 splines)
    Fully Independent
  • dry clutch
    Mechanical Engagement
    Flip-up PTO Shaft Guard

    HITCH:
    3-point Category II with flex lower links
    and telescoping stabilizers
    3664 lbs. Lift Capacity (SAE)
    Swinging Drawbar
    Mechanical Draft Control
    Upper Link Draft Sensing

    STEERING/BRAKES:
    Hydrostatic Power Steering
    Brakes- Hydraulic assist wet brakes

    INSTRUMENTATION:
    Analog Instrumentation with warning
    lights for air cleaner service

  • alternator
  • oil pressure
  • fuel sediment
    and water sensor
Visualizza la pagina del rivenditore

Windridge Implements, LLC

Indirizzo
105 N Gunder Rd
P O Box 548
Elkader, Iowa 52043
Stati Uniti d'America
DirectLine: 563-245-2636
Fax: 563-245-1076
Lingue parlate: English
Disponibilità e prezzi sono soggetti a modifiche e/o a priorità di vendita.
2023 Case IH FARMALL 75C Image 1
2023 Case IH FARMALL 75C Image 2
2023 Case IH FARMALL 75C Image 3
2023 Case IH FARMALL 75C Image 4
2023 Case IH FARMALL 75C Image 5

Condividere

SMS
Email
Facebook
Twitter
Pinterest
reddit
Tumblr
WhatsApp
Blogger
More

Conversione del prezzo

Questa è una conversione del prezzo di cortesia. Potrebbe non essere esatto in quanto cambiano i tassi di conversione della valuta. Quando si effettua un acquisto, è implicito il prezzo originale nella valuta nativa.

Commerciante Contattare


I campi contrassegnati da * (asterisco) sono obbligatori.

Avviso Prezzo


Iscriviti per essere informato sulle variazioni di prezzo di questo articolo.

Send us a message (optional)
Lingua
North America
English Español Français
Latin America
English Español Português
Asia Pacific
English 中文