SUPERIOR GUARDING 6›¼À™ X 20›¼À™ 3 DECK HORIZONTAL SCREEN EQUIPPED AS PER BELOW: UNIT SPECIFICATIONS: - SCREEN SIZE ›¼À“ 6›¼À™X20›¼À™ THREE DECK TRIPLE SHAFT HORIZONTAL SCREEN - SLOPE ANGLE ›¼À“ SET AT LOW INCLINE (2.5 DEGREES) - MOVEMENT ›¼À“ HIGH G-FORCE SCREEN WITH ADJUSTABLE SPEED AND STROKE - BEARINGS ›¼À“ 160MM SPHERICAL ROLLER BEARINGS WITH 32 GEARS - SPRINGS ›¼À“ STANDARD COIL SPRINGS - SUSPENSION DAMPER ›¼À“ VS2 SYSTEM - MOTOR BASE ›¼À“ SLIDE ADJUSTMENT MOTOR BASE [LESS MOTOR] - BODY CONSTRUCTION ›¼À“ HUCK BOLTED BODY CONSTRUCED OF 5/16›¼À STRUCTURAL STEEL SIDEPLATES - DISCHARGE LIPS ›¼À“ 6›¼À DISCHARGE LIPS WITH 1/4" AR LINERS - FEEDBOX ›¼À“ 24›¼À FEEDBOX WITH 1/4" AR LINERS - INSPECTION PORTS ›¼À“ BOLT-ON INSPECTION PORTS AND SPRAY HOLE KNOCKOUTS - BASE FRAME ›¼À“ NOT INCLUDED - SHAFT HOUSING PROTECTION ›¼À“ STANDARD MILD STEEL PROTECTION CLAMPED TO SHAFT HOUSING - SPRAY SYSTEM ›¼À“ NOT INCLUDED - PAINT ›¼À“ SUPERIOR CLASS 1 ›¼À“ (1) COAT PRIMER (1) TOP COAT ENAMEL GRAPHITE GRAY WITH SAFETY YELLOW GUARDING DRIVE SPECIFICATIONS: - DRIVE - RIGHT HAND DRIVE (STANDARD) - MOTOR ›¼À“ CUSTOMER SUPPLIED 1200 RPM 40 HP MOTOR - MOTOR FRAME ›¼À“ 364T MOTOR FRAME INCLUDED - MOTOR SHEAVE ›¼À“ INCLUDED WITH 2.375›¼À BUSHING - V-BELT DRIVE ›¼À“ WITH DRIVE GUARD AND TENSION SYSTEM - VOLTAGE ›¼À“ 460 V / 3 PH / 60 HZ - 1800RPM TOP DECK SPECIFICATIONS: - TOP DECK ›¼À“HEAVY X-BRACE SINGEL CROWN DECK TO ACCOMMODATE 5›¼À™ SINGEL CROWN WIRE CLOTH MEDIA SECTIONS: MAX FEED SIZE IS 10›¼À - SCREEN MEDIA ›¼À“ SUPPLIED AND INSTALLED BY CUSTOMER - TAKE UP ›¼À“ STANDARD TAKE UP RAILS - CROSS MEMBER PROTECTORS ›¼À“ NOT INCLUDED SECOND DECK SPECIFICATIONS: - SECOND DECK ›¼À“ HEAVY X-BRACE SINGLE CROWN DECK TO ACCOMMODATE 5›¼À™ SINGLE CROWN WIRE CLOTH MEDIA SECTIONS - SCREEN MEDIA ›¼À“ SUPPLIED AND INSTALLED BY CUSTOMER - TAKE UP ›¼À“ STANDARD TAKE UP RAILS - CROSS MEMBER PROTECTORS ›¼À“ NOT INCLUDED BOTTOM DECK SPECIFICATIONS: - BOTTOM DECK ›¼À“ DECK IS SET UP FOR END TENSIONED WIRE CLOTH - SCREEN MEDIA ›¼À“ SUPPLIED AND INSTALLED BY CUSTOMER - TAKE UP ›¼À“BOTTOM DECK END TENSION - CROSS MEMBER PROTECTORS ›¼À“ NOT INCLUDED - SIGN PLATE - GENREAL SIGN PLATE INCLUDED