EquipmentLocator.com

Yoder & Frey May 9th Auction, Houston, TEXAS

Especificações
Modelo:
FARMALL 75C
Notas
  • 2MMV+DIV w/Joystick New Trim / 2 mid-mount valves
  • joystick
  • and 3rd function / switch with diverter valve
  • l620 loader on unit Condition: Excellent l620 loader on unit DIESEL ENGINE:
    :
    Farmall 75C
    74 Gross Engine hp
    64 PTO hp @ 2300 rpm
    4 Cyl Turbocharged Engine
    195 cu in (3.4 L) Displacement

    US EPA Tier IV Emissions Compliant
    Bosch Fuel Injection Pump
    Electric Engine Shutoff
    Hand and Foot Throttle Controls
    Grid Heater Starting Aid
    Air Cleaner: Dry Type with Safety
    Element
    Fuel Sediment Filter with Water Sensor
    23.8-gallon (90L) Fuel Tank with
    Bottom Protection Shield

    EXHAUST:
    Under Hood Muffler with Vertical
    Exhaust

    TRANSMISSION:
    11 Inch Clutch
    Floor-mounted LH side Mechanical
    Shuttle
    (4) Synchronized Gears
    (2) Non-synchronized Ranges
    12 Forward and 12 Reverse Speeds
    Forward Reverse Synchronized Shuttle
    19 mph (30 kph) top speed
    Speed varies with tire selection
    Park Lock on Range Lever

    AXLES:
    MFD Front Axle:
    Electro-Hydraulic MFD Engagement
    Adjustable Tread Width from 60.8 in.
    to 76.6 in.
    Limited Slip Differential Lock
    Standard FAS Ready

    AXLES: (Continued)
    Rear Axle:
    Flange Type
    Adjustable Tread Width 52.2 - 76.0 in.
    Rear Differential Lock - MFD
    mechanically engaged

    TIRES:
    Front MFD tires - 11.2-24 R1
    Rear MFD tires - 16.9-30 R1

    HYDRAULIC SYSTEM:
    Open Center System - (1) Open
    Center Remote Valve with detent
    Dual Gear Pumps
  • (2) Couplers
    Implement Pump: 12.5 gpm (47.5 L)
    Steering Pump: 7.3 gpm (27.5 L)
    Total Flow: 19.8 gpm (75L)

    PTO:
    540 rpm Mechanical PTO
    (1-3/8 in. 6 splines)
    Fully Independent
  • dry clutch
    Mechanical Engagement
    Flip-up PTO Shaft Guard

    HITCH:
    3-point Category II with flex lower links
    and telescoping stabilizers
    3664 lbs. Lift Capacity (SAE)
    Swinging Drawbar
    Mechanical Draft Control
    Upper Link Draft Sensing

    STEERING/BRAKES:
    Hydrostatic Power Steering
    Brakes- Hydraulic assist wet brakes

    INSTRUMENTATION:
    Analog Instrumentation with warning
    lights for air cleaner service

  • alternator
  • oil pressure
  • fuel sediment
    and water sensor

2023 Case IH FARMALL 75C

Novo
Tractores
Para Venda
$82 800,00 USD

Contatos de Vendas

Especificações
Modelo:
FARMALL 75C
Notas
  • 2MMV+DIV w/Joystick New Trim / 2 mid-mount valves
  • joystick
  • and 3rd function / switch with diverter valve
  • l620 loader on unit Condition: Excellent l620 loader on unit DIESEL ENGINE:
    :
    Farmall 75C
    74 Gross Engine hp
    64 PTO hp @ 2300 rpm
    4 Cyl Turbocharged Engine
    195 cu in (3.4 L) Displacement

    US EPA Tier IV Emissions Compliant
    Bosch Fuel Injection Pump
    Electric Engine Shutoff
    Hand and Foot Throttle Controls
    Grid Heater Starting Aid
    Air Cleaner: Dry Type with Safety
    Element
    Fuel Sediment Filter with Water Sensor
    23.8-gallon (90L) Fuel Tank with
    Bottom Protection Shield

    EXHAUST:
    Under Hood Muffler with Vertical
    Exhaust

    TRANSMISSION:
    11 Inch Clutch
    Floor-mounted LH side Mechanical
    Shuttle
    (4) Synchronized Gears
    (2) Non-synchronized Ranges
    12 Forward and 12 Reverse Speeds
    Forward Reverse Synchronized Shuttle
    19 mph (30 kph) top speed
    Speed varies with tire selection
    Park Lock on Range Lever

    AXLES:
    MFD Front Axle:
    Electro-Hydraulic MFD Engagement
    Adjustable Tread Width from 60.8 in.
    to 76.6 in.
    Limited Slip Differential Lock
    Standard FAS Ready

    AXLES: (Continued)
    Rear Axle:
    Flange Type
    Adjustable Tread Width 52.2 - 76.0 in.
    Rear Differential Lock - MFD
    mechanically engaged

    TIRES:
    Front MFD tires - 11.2-24 R1
    Rear MFD tires - 16.9-30 R1

    HYDRAULIC SYSTEM:
    Open Center System - (1) Open
    Center Remote Valve with detent
    Dual Gear Pumps
  • (2) Couplers
    Implement Pump: 12.5 gpm (47.5 L)
    Steering Pump: 7.3 gpm (27.5 L)
    Total Flow: 19.8 gpm (75L)

    PTO:
    540 rpm Mechanical PTO
    (1-3/8 in. 6 splines)
    Fully Independent
  • dry clutch
    Mechanical Engagement
    Flip-up PTO Shaft Guard

    HITCH:
    3-point Category II with flex lower links
    and telescoping stabilizers
    3664 lbs. Lift Capacity (SAE)
    Swinging Drawbar
    Mechanical Draft Control
    Upper Link Draft Sensing

    STEERING/BRAKES:
    Hydrostatic Power Steering
    Brakes- Hydraulic assist wet brakes

    INSTRUMENTATION:
    Analog Instrumentation with warning
    lights for air cleaner service

  • alternator
  • oil pressure
  • fuel sediment
    and water sensor
Ver página do revendedor

Windridge Implements, LLC

Endereço
105 N Gunder Rd
P O Box 548
Elkader, Iowa 52043
Estados Unidos
DirectLine: 563-245-2636
Fax: 563-245-1076
Línguas faladas: English
Disponibilidade e preço sujeitos a alterações e/ou à venda anterior.
2023 Case IH FARMALL 75C Image 1
2023 Case IH FARMALL 75C Image 2
2023 Case IH FARMALL 75C Image 3
2023 Case IH FARMALL 75C Image 4
2023 Case IH FARMALL 75C Image 5

Compartilhar

SMS
Email
Facebook
Twitter
Pinterest
reddit
Tumblr
WhatsApp
Blogger
More

Conversão de preço

Esta é uma conversão de preço de cortesia. Pode não ser preciso, pois as taxas de conversão de moeda mudam. Ao fazer uma compra, o preço original na moeda nativa está implícito

Contato do Negociante


Os campos marcados com * (asterisco) são obrigatórios.

Alerta preço


Inscreva-se para receber notificações de alterações de preços neste artigo.

Send us a message (optional)
Línguas
North America
English Español Français
Latin America
English Español Português
Asia Pacific
English 中文