The KMC Litter Windrower is designed to facilitate the practice of composting in poultry houses. This tool will greatly reduce the cake size and form tight, tall windrows to insure heat levels that kill disease causing pathogens. After windrows heat out the first time, the Windrower efficiently turns the windrow for further composting. When composting is completed, the Windrower is used again to quickly level the composted litter in preparation for the new flock.
Specifications and Features
-3 foot tall and 9 1/2 foot wide working area
-Two overlapping, forward turning augers. 14" in diameter, 3/8 material
-Open discharge end to allow unobstructed litter flow
-90 degree horizontal adjustment (45 degree on blade and 45 degree on support area
-Adjustable skids
-Spring loaded wall edger
-Bolt on reversible blade and wear strip for easy replacement
-#80 heavy duty drive chains run in grease bath
-PTO CV drive
-Oversized pivot pins with greased bushings for longevity
-Shear bolt protected gear box
-Requires two hydraulic remotes for standard cylinders
-Rear hydraulic cylinder operated gauge wheels
-Approximate weight 1900 lbs
-Category 2 hitch
-65 HP PTO minimum for maximum efficiency (will run with less HP but may take more that one pass)
The KMC Litter Windrower is designed to facilitate the practice of composting in poultry houses. This tool will greatly reduce the cake size and form tight, tall windrows to insure heat levels that kill disease causing pathogens. After windrows heat out the first time, the Windrower efficiently turns the windrow for further composting. When composting is completed, the Windrower is used again to quickly level the composted litter in preparation for the new flock.
Specifications and Features
-3 foot tall and 9 1/2 foot wide working area
-Two overlapping, forward turning augers. 14" in diameter, 3/8 material
-Open discharge end to allow unobstructed litter flow
-90 degree horizontal adjustment (45 degree on blade and 45 degree on support area
-Adjustable skids
-Spring loaded wall edger
-Bolt on reversible blade and wear strip for easy replacement
-#80 heavy duty drive chains run in grease bath
-PTO CV drive
-Oversized pivot pins with greased bushings for longevity
-Shear bolt protected gear box
-Requires two hydraulic remotes for standard cylinders
-Rear hydraulic cylinder operated gauge wheels
-Approximate weight 1900 lbs
-Category 2 hitch
-65 HP PTO minimum for maximum efficiency (will run with less HP but may take more that one pass)
Dit is een beleefdheidsprijsconversie. Het is mogelijk niet exact omdat de wisselkoersen veranderen. Bij het doen van een aankoop wordt de oorspronkelijke prijs in de eigen valuta geïmpliceerd.
Handelaar Contacteren|
Velden gemarkeerd met een sterretje (*) zijn verplicht.
Prijs Waarschuwing
Schrijf u in om op de hoogte gehouden te worden van prijswijzigingen voor dit artikel.