PrintClose   
                

JCI K200RFSD

General Equipment & Supplies, Inc.

Sales Department
4300 Main Ave
PO Box 2145
Fargo, North Dakota, 58103
USA
OFFICE +1 701 282-2662 FAX +1 (701) 364-2190
TOLL FREE (800) 437-2924
Contact DealerSend to a FriendHotlist (6)Show All Pics (4)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Fargo, North Dakota, USA
STOCK #E00051485SERIAL#J-09099AVAILABLEImmediately
MAKEJCICATEGORYFor SalePRICE
499500 USD
499500
MODELK200RFSDSTATUSOn Rent
YEAR2016CLASSUsed
NOTES
  • PORTABLE K200+ KODIAK PLUS CONE PLANT WITH 48" SIDE FOLD CONE CONVEYOR AND 42" FEED CONVEYOR; EQUIPPED AS DESCRIBED BELOW.
    K200S CONE CRUSHER EQUIPPED AS PER BELOW:

    - AGGRESSIVE STROKE MAXIMUM PRODUCTION CONE CRUSHER WITH
    PATENTED TRAMP IRON RELIEF SYSTEM WITH PRESSURE RELIEF VALVES FOR
    RELIEVING CRUSHER DURING TRAMP IRON EVENTS
    - LARGE BORE HEAVY-DUTY RELIEF CYLINDERS REQUIRE LOWER PRESSURE
    WITH HIGH HOLD DOWN FORCE
    - HYDRAULIC THREAD ADJUSTMENT FOR QUICK EASY SETTING CHANGES AND
    EVEN BOWL LINER WEAR
    - HYDRAULIC CHAMBER CLEARING AND PATENTED HYDRAULIC THREAD
    LOCKING RING
    - INTERCHANGEABLE CHAMBER CONFIGURATIONS CONE HEAD ANTI-SPIN
    BRAKE
    - BASEFRAME WEAR LINERS V-SEAT BRASS WEAR LINERS
    - SKID MOUNTED REMOTE ADJUST HYDRAULIC PACKAGE INCLUDES
    EXTERNALLY MOUNTED LUBE PUMP AND RESERVOIR WITH 3 HP ELECTRIC
    MOTOR OIL HEATER PLC AND ELECTRICAL JUNCTION BOX
    - CONTROL PANEL WITH 50- CORD MANGANESE (INSTALLED) CRUSHER
    SHEAVE CRUSHER TOOLS
    - REMOTE PANEL CABELS 100-
    - COARSE MANGANESE (INSTALLED)
    - HYDRAULIC CONE BRAKE
    - PAINTED CEDAR RAPIDS STONE GREY EMERGENCY STOP DETECTION. HIGH
    BRIGHTNESS MONOCHROME DISPLAY.
    - 100- REMOTE PANEL CABLES
    - 200 HP 1200 RPM TEFC TECO CONE MOTOR.
    - ENCLOSED DRIVE BELT GUARD AND BELT DRIVE.
    - HEAVY DUTY CONE MOUNT AND AR LINED UNDER CONE DISCHARGE HOPPER
    WITH ½"X6" ADJUSTABLE WIPERS.
    - STANDARD CONE FEED RING WITH EXPANDED METAL WINDOWS:
    - STANDARD HOLD-DOWN BRACKETS INCLUDED.

    -RECONDITIONED CARRIER - RECONDITIONED 2018
    - WALKWAYS AROUND CONE WITH DIAMOND PLATE FLOOR TOE BOARDS
    AND 42" TUBESTEEL HANDRAILS.
    - 48" SIDE-FOLD UNDER CONE CONVEYOR; 7.5 HP TEFC:
    - VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.
    - 3-PLY BELT 1/4" COVER DODGE SCM BEARINGS.
    - DODGE SHAFT MOUNT REDUCER.
    - CLOSE SETTING RUBBER IMPACT IDLERS UNDER CONE THEN 36" SPACING.

    36" X 35- CONE FEED CONVEYOR 10 HP TEFC MOTOR:
    3 PLY BELT DODGE SCM BEARINGS.
    IMPACT IDLERS IN FEED AREA THEN 36" SPACING ON CEMA C IDLERS.
    VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.

    3 AXLE CARRIER 24" WF 68# BEAMS:
    9700 HUTCH SUSPENSION 10- SPAN.
    22 500# AXLES AND 11:00RX22.5 TIRES.
    AIR BRAKES BRAKE LIGHTS MARKER LIGHTS REFLECTIVE TAPE AND MUD FLAPS.

    - SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND
    TWO FINISH COATS OF PAINT INCLUDED.

    - PLANT MOUNTED OVER FLOW CHUTE DESIGNED TO STAY IN PLACE WHEN
    UNDER CONVEYOR IS FOLDED:
    - OVER FLOW CHUTE WITH SELF SUPPORTING FEED RING:
    - MANUAL FOLD UNDER CONE CONVEYOR:
    - MANUAL RAISE & LOWER FEED CONVEYOR TO GIVE ADEQUATE CLEARANCE
    TO MOVE UPPER BOWL ASSEMBLY.
    - TOOL BOX MOUNTED ON CARRIER.
    - OBSERVATION STAND OVER MOTOR
    - FRONT PLATFORM WITH HANDRAILS OVER KINGS PIN AREA

    - GUARDING WE DO NOT GUARANTEE GUARDING WILL PASS EVERY
    INSPECTORS CHECKLIST IT ISTHE RESPONSIBILITY OF THE END USER TO
    MAKE SURE THE EQUIPMENT MEETS MSHA REQUIREMENTS AND
    REQUIREMENTS OF THE INDIVIDUAL OF THE INDIVIDUAL INSPECTOR.

    ELECTRICAL SWITCHGEAR FOR K200+ RFSD EQUIPPED AS PER BELOW:
    - 54X72 INCH TYPE 4X 2 DOOR HINGED ENCLOSURE
    - EXTERNAL DISCONNECT HANDLE WITH LOCK OUT TAG OUT POINT
    - CORD HANGERS ON PLANT
    - MANUAL SIREN CONTROLLED ON DOOR
    - AUTOMATIC CONE START BUZZER ON PLANT
    - ILLUMINATED E-STOP ON ENCLOSURE DOOR
    - 300HP SCHNEIDER ALTISTART 48 SOFTSTART FOR CONE
    - INTEGRATED TO MILO SYSTEM
    - WINDOW KIT FOR SAFE VIEWING OF SOFTSTART AMPS AND CODES
    - 1 SIZE 2 ABB STARTER FOR HYDRAULIC MOTOR
    - 1 SIZE 1 ABB STARTER FOR CONE FEED CONVEYOR
    - 3 TELEMACANIQUE INTEGRAL 18 STARTERS FOR LUBE PUMP COOLING FAN
    AND DISCHARGE CONVEYOR
    - 3 HP LUBE MOTOR CONTROLLED VIA MILO
    - 15 HP HYDRAULIC MOTOR CONTROLLED VIA MILO
    - 10 HP CONE FEED CONVEYOR MOTOR CONTROLLED WITH BUTTONS ON
    ENCLOSURE DOOR. INTERLOCKED WITH DISCHARGE CONVEYOR VIA STARTER
    AUXILLARY CONE LUBE SYSTEM AND CONE UP TO SPEED
    - 7.5 HP DISCHARGE CONVEYOR MOTOT CONTROLLED WITH BUTTONS ON
    ENCLOSURE DOOR
    - 1 HP FAN MOTOR CONTROLLED VIA MILO
    - 7.5 KVA AUXILLARY TRANSFORMER FOR CONTROL POWER MOUNTED ON
    FRAME
    - MILO HMI BOX
    - 100- OF DATA CABLE FITTED WITH QUICK CONNECTS FOR CONNECTION TO
    MILO HMI BOX AND PLANT
    - 100 FT OF 350 MCM TYPE W POWER CORD