PrintClose   
                

Other K300RD

General Equipment & Supplies, Inc.

Sales Department
905 20th Ave SE
Minot, North Dakota, 58701
USA
OFFICE +1 701 852-0479 FAX +1 (701) 852-1451
TOLL FREE (800) 825-0479
LANGUAGES SPOKEN English
Contact DealerSend to a FriendHotlist (5)Show All Pics (7)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Minot, North Dakota, USA
STOCK #E00051731SERIAL#PC-2-454-16AVAILABLEImmediately
MAKEOtherCATEGORYFor SalePRICE
590000 USD
590000
MODELK300RDSTATUSOn Rent
YEAR2016CLASSUsed
NOTES
  • PORTABLE JCI/FABT K300RD CONE CHASSIS WITH A REAR DISCHARGE 42" UNDER CONE
    CONVEYOR:

    K300S CONE CRUSHER EQUIPPED AS PER BELOW:

    - AGGRESSIVE STROKE MAXIMUM PRODUCTION CONE CRUSHER WITH
    PATENTED TRAMP IRON RELIEF SYSTEM WITH PRESSURE RELIEF VALVES FOR
    RELIEVING CRUSHER DURING TRAMP IRON EVENTS. LARGE BORE H-D RELIEF
    CYLINDERS REQUIRE LOWER PRESSURE WITH HIGH HOLD DOWN FORCE.
    HYDRAULIC THREAD ADJUSTMENT FOR QUICK EASY SETTING CHANGES AND
    EVEN BOWL LINER WEAR. HYDRAULIC CHAMBER CLEARING AND PATENTED
    HYDRAULIC THREAD LOCKING RING. INTERCHANGEABLE CHAMBER
    CONFIGURATIONS. CONE HEAD ANTI-SPIN BRAKE. BASE FRAME WEAR LINERS
    V-SEAT BRASS WEAR LINERS. SKID MOUNTED REMOTE ADJUST HYDRAULIC
    POWER UNITWITH 15 HP MOTOR PLC HYDRAULIC RESERVOIR AND
    ELECTRICAL JUNCTION BOX. LUBE PANEL WITH 3 HP ELECTRIC MOTOR PUMP
    AND RESERVOIR WITH OIL HEATER. CONTROL PANEL WITH 50- CORD.
    INCLUDES CHOICE OF CRUSHER MANGANESE (INSTALLED) CRUSHER SHEAVE
    AND CRUSHER TOOLS.
    CONTROL PANEL W/ REAL TIME CRUSHER DIAGNOSTICS DISPLAY:
    - PLC BASED CONTROL SYSTEM. SEQUENTIAL START-UP AND SHUT-DOWN OF
    CONE CRUSHER. SUPPORT DEVICES INCLUDE WARNING HORN LUBE OIL
    COOLER HYDRAULIC PUMP LUBE PUMP LUBE HEATER. CONTROL FUNCTIONS
    INCLUDE BOWL UPPER ASSEMBLY ROTATE UP/DOWN BOWL CRUSHING
    CHAMBER CLEARING AUTOMATED CLOSED-SIDE-SETTING ADJUSTMENT.
    CLOSED-SIDE-SETTING VALUE CRUSHER MOTOR CURRENT(S) HYDRAULIC
    PUMPPRESSURE HYDRAULIC BOWL CLAMP PRESSURE HYDRAULIC TRAMP
    IRON RELIEF PRESSURE BOWL ROTATION LIMIT DETECTION HYDRAULIC
    TEMPERATURES LUBRICATION OIL AT SUMP AND RETURN TEMPERATURES
    LUBRICATION OIL FLOW RATE LOW LUBE OIL LEVEL WARNING AND
    EMERGENCY STOP DETECTION. HIGH BRIGHTNESS MONOCHROME DISPLAY.
    - 100- REMOTE PANEL CABLES IN LIEU OF 50-
    TECO 300 HP 1200 RPM TEFC CONE MOTOR:
    - 300 HP
    - 1200 RPM
    - 449TZ FRAME NUMBER
    PLANT MOUNTED HYDRAULIC SYSTEM
    ENCLOSED DRIVE BELT GUARD AND BELT DRIVES:
    - INSPECTION AND CLEAN-OUT DOORS
    - COGGED BELT DRIVE
    HEAVY DUTY CONE MOUNT AND AR LINED UNDER CONE DISCHARGE HOPPER WITH 1/2" X 6"
    ADJUSTABLE WIPERS
    CONE OVERFLOW CHUTE WITH FREE STANDING FEED RING SYSTEM.
    WALKWAYS AROUND CONE WITH SKYWALK FLOOR AND 3" TOE BOARDS 42" TUBESTEEL
    HANDRAILS.
    42" UNDER CONE CONVEYOR DISCHARGING TO THE REAR OF PLANT:
    - VULCANIZED LAGGED HEAD PULLEY SELF CLEANING WING TAIL TULLEY
    - 3 PLY BELT 1/4 COVER DODGE SCMBEARINGS
    - 15 HP TEFC 5207 FALK REDUCER
    - CLOSE SETTING ON CEMA C IDLERS UNDER CONE THEN 36" SPACING
    - VULCANIZED BELT SPLICE
    - SUPERIOR BELT WIPER
    2 AXLE CARRIER 24" WF 68# BEAMS:
    - 9700 HUTCH SUSPENSION 10- SPAN
    - 22 500# AXLES AND 11:00X22.5 TIRES
    - AIR BRAKES BRAKE LIGHTS MARKER LIGHTS REFLECTOR TAP AND MUD
    FLAPS
    - FOUR GROUND SUPPORT STANDS WITH JACKING LEGS FAB TEC 31 000# RUN
    ON LEGS
    - 4 LEG SYSTEM
    SELF-CONTAINED HONDA 8 HP HYDRAULIC POWER PACKAGE:
    - ELECTRIC START
    - 12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION
    - 2 1/2 GPM PUMP
    ADDITIONAL PLATFORM OVER PIN WITH SKYWALK 3" TOE BOARD WITH HANDRAILS.
    TOOL BOX MOUNTED ON CHASSIS
    OBSERVATION STAND OVER MOTOR INCORPORATED INTO A WALK-IN DRIVE GUARD
    RECOMMENDED OPTION FOR EASY CONE DRIVE MAINTENANCE AND CON FEED OBSERVATION:
    - HANDRAIL AROUND PLATFORM
    - EASY ACCESS DOORS
    SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH COATS
    INCLUDED PAINTED TEREX WHITE.

    GUARDING WE DO NOT GUARANTEE GUARDING WILL PASS EVERY INSPECTORS CHECKLIST IT
    IS THE RESPONSIBILITY OF THE END USER TO MAKE SURE THE EQUIPMENT MEETS MSHA
    REQUIREMENTS AND REQUIREMENTS OF THE INDIVIDUAL OF THE INDIVIDUAL INSPECTOR.

    ELECTRICAL SWITCHGEAR FOR K300S CONE PLANT EQUIPPED AS PER BELOW:
    - 60X60 NEMA 3R/4 ENCLOSURE AND COMPONENT PANEL
    - CUSTOM CORD CAGE AND LEG KIT SETS OFF PLANT FOR OPERATION
    - REINFORCED LIFTING EYES
    - MANUALLY OPERATED SAFETY START UP SIGNAL
    - ILLUMINATED EMERGENCY STOP PANIC BUTTON STYLE
    - ALL MOTOR CONTROL TO BE INSTALLED IN ENCLOSURE DOOR
    - 300 HP CONE ABB PSTB REDUCED VOLTAGE SOFT STARTER
    - AMMETER
    - INTEGRATED TO KCS (KODIAK CONTROL SYSTEM)
    - WINDOW KIT FOR SAFEVIEWING OF MOTOR AMPS AND START CODES
    - (4) SIZE 2 MOTOR STARTS TO CONTROL THE FOLLOWING:
    - 15 HP HYDRAULIC PUMP - NO CONTROL BUTTONS CONTROLLED BY KCS
    SYSTEM
    - 15 HP CONE FEED CONVEYOR - CONTROL BUTTONS IN DOOR INTERLOCKED TO:
    CONED DISCHARGE CONVEYOR - VIA MOTOR STARTER INTERLOCK CONE
    LUBRICATION - VIA KCS CONTROL CONE UP TO SPEED - VIA KCS CONTROL
    - 10 HP CONE DISCHARGE CONVEYOR - CONTROL BUTTONS IN THE DOOR
    - 15 HP ROCK RETURN CONVEYOR - CONTROL BUTTONS IN DOOR - 60 AMP
    RECEPTACLE
    - SIZE 0 MOTOR STARTER: 3 HP CONE LUBE PUMP - NO BUTTONS - KCS
    CONTROLLED - 20 AMP RECEPTACLE
    - SIZE 00 MOTOR STARTER: 1 HP CONE LUBE COOLING FAN - NO BUTTONS - KCS
    CONTROLLED
    - 10 KVS AUXILLIARY TRANSFORMER:
    -INSTALLED TO CORD CAGE
    - (2) 120 VAC 20 AMP WEATHERPROOF GFCI RECEPTACLES
    - 24 PIN PHOENIX CONNECTOR TO PROVIDE QUICK CONNECT/DISCONNECT OF
    KCS CONTROL SYSTEM
    - 100- POWER CORDS

    - ELECTRICAL SWITCHGEAR FOR K300S IOC PLANT:

    - 60X48 ENCLOSURE WITH 600 AMP MAIN AND OPERATOR-UPPER RH
    - 300 HP ABB SOFT STARTER WITH INTEGRAL BYPASS CONTACTOR
    - ALLEN BRADLEY NEMA RATED FVNR STARTERS WITH CIRCUIT BREAKERS
    - 15 HP OVERHEAD FEED
    - 20 HP SPARE 1 WITH 60 AMP RECEPTACLE
    - 15 HP UNDER CRUSHER DISCHARGE
    - 100 AMP FEED BREAKER FOR MVPX POWER PACKAGE
    - 5 KVA TRANSFORMER WITH 20 A 110V SERVICE HOUR METER SAFETY
    STARTUP HORN (MANUAL) E-STOP 100FT REMOTE PENDANT CORD CAGE LEG
    KIT - SETS OFF FOR OPERATION
    - CSA AND MANITOBA APPROVED