PrintClose   
                

Superior P300RD

General Equipment & Supplies, Inc.

Sales Department
4600 Valley Industrial Blvd S
Shakopee, Minnesota, 55379
USA
OFFICE +1 952 224-1500 FAX +1 (952) 224-1570
TOLL FREE (800) 966-1455
LANGUAGES SPOKEN English
Contact DealerSend to a FriendHotlist (6)Show All Pics (8)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Shakopee, Minnesota, USA
STOCK #E00052152SERIAL#1196921AVAILABLEImmediately
MAKESuperiorCATEGORYFor SalePRICE
605000 USD
605000
MODELP300RDSTATUSOn Yard
YEAR2018CLASSUsed
NOTES
  • 2018 SUPERIOR P300RD REAR DISCHARGE CONE PLANT EQUIPPED AS PER BELOW:

    CARRIER CHASSIS:
    - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
    - TRIDEM AXLE SPRING SUSPENSION WITH (12) 11X22.5 RADIAL TIRES STEEL RIMS
    - COMPLETE AIRBRAKE SYSTEM MUD FLAPS ON REAR AXLE TRAVEL LIGHTS WITH BRAKE
    AND DIRECTIONAL SIGNALS
    - FIFTH WHEEL HITCH
    - (2) SLIDE/SWING DOWN KING PIN SUPPORTS
    - (6) FIXED STRUCTURAL STEEL CRIBBING LEGS
    - GREASE PACKAGE CONSISTING OF 1-2 LOCATIONSFOR GREASING ENTIRE PLANT

    PATRIOT P300 CONE CRUSHER:
    - 300 HP 1200 RPM 480V/3PH/60HZ
    - MAIN FRAME ONE PIECE CAST STEEL MAIN FRAME ASSEMBLY AR STEEL
    LINERS 4340 FORGED STEEL SHAFT BRONZE SEAT LINERS WTIH RETENTION
    LIP BRONZE PINBUSHINGS AND AST ARM GUARDS
    - ADJUSTMENT RING CAST STEEL ADJUSTMENTRING AND CLAMPING RING WITH INTERNAL
    THREADS (8) CLAMPING CYLINDERS (5) INDEXING PINS ADJUSTMENT MOTOR MOUNT
    (3) VIBRATION SENSORS DETECT ADJUSTMENT RING MOVEMENT
    - ADJUSTMENT ASSEMBLY FORGED STEEL DRIVE RING DRIVE RING SUPPORTS WITH MOLDED
    URETHANE WEAR PADS PLANETARY DRIVE UNIT WITH PINION HYDRAULIC DRIVE MOTOR
    (SPRING APPLIED BRAKE) (2) BOWL
    ADJUSTMENT SENSORS
    - BOWL ASSEMBLY CAST STEEL WITH EXTERNAL THREADS STEEL ADAPTER RING WITH
    THREADED RETENTION HARDWARE FITTED WITH MANGANESE STEEL LINER
    - HEAD ASSEMBLY CAST STEEL WITH FORGED STEEL HEAD BALL RAISED SEAT WITH WEAR
    INDICATOR GROOVE BRONZE UPPER AND LOWER BUSHINGS MOLDED URETHANE T-SEAL
    MANGANESE STEEL MANTLE
    - LINER CONFIGURATION COARSE AND COARSE
    - BACKING LINERS REQUIRED POURED BACKING MATERIAL FOR INSTALLATION
    - MANGANESE CONTENT STANDARD 18% MANGANESE LINER
    - ECCENTRIC CAST DUCTILEIRON WITH BRONZE BUSHIN
    - COUNTERWEIGHT CAST STEEL POURED LEAD WEIGHT AR STEEL COUNTERWEIGHT GUARD
    FORGED STEEL SPIRAL BEVEL GEAR MOLDED URETHANE U-SEALS
    - SOCKET ASSEMBLY FORGED STEEL SOCKET WITH BRONZE LINER
    - COUNTERSHAFT BOX CASTSTEEL WITH BRONZE BUSHINGS FORGED STEEL COUNTERSHAFT
    AND SPIRAL BEVEL PINION GEAR
    - TRAMP RELEASE (6) HYDRAULIC CYLINDERS MOUNTED ROD END DOWN WITH PROTECTIVE
    BOOT COVERS RELIEF VALVE FOR TRAMP PRESSURE RELIEF SINGLE GAS CHARGED
    BLADDER ACCUMULATOR
    - DRIVEN SHEAVE 8-GROOVE SHEAVE WITH SPEED SENSOR CRUSHER SHEAVE V-BELT
    LUBRICATION SYSTEM FEED HOPPER COUNTERSHAFT BLOWER

    HOPPERS AND CHUTES:
    - UNDER-CRUSHER GATHERING HOPPER CONSTRUCTED OF 3/8" AR400 STEEL
    -DIRECTS MATERIAL ONTO THE REAR DISCHARGE CONVEYOR
    - ADJUSTABLE RUBBER FLASHING FULL LENGTH OF HOPPER
    - OVER-FLOW CHUTE CONSTRUCTED OF 1/4" MILD STEEL
    - DIRECTS OVER-FLOW MATERIAL FROM FEED BASKET ONTO THE REAR DISCHARGE CONVEYOR

    42" REAR DISCHARGE CONVEYOR:
    - CLASS II DRIVE - 20 HP MOTOR V-BELT DRIVE SHAFT MOUNT REDUCER
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - CAPACITY - 500 STPH OF 100 PCF MATERIAL
    - BELT SPEED - 300 FPM
    - HEAD PULLEY - 14" DIAMETER CROWN FACE 3/8" HERRINGBONE LAGGED DRUM
    - TAIL PULLEY - 12" DIAMETER CHEVRON WING PULLEY
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - LOAD AREA IDLERS - SUPERIOR SEAL SYSTEM
    - CARRY IDLERS - C5 20 DEGREES TROUGH LOW PRO STD. MOUNT SPACED 3.5- OC
    - RETURN IDLERS- C5 FLAT STEEL ROLLS
    - BELTING 3-PLY 3/16" X 1/16" 330 PIW
    - BELT SPLICE FACTORY VULCANIZED SPLICE
    - SUPERIOR EXTERRA PRIMARY BELT CLEANER

    HYDRAULIC "RUN-ON" JACKS:
    - (6) 6" X 18" HYDRAULIC CYLINDERS
    - COUNTERBALANCE VALVE LOCKING SYSTEM THAT REQUIRES NO PINNING
    - (6) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
    - 9 HP HONDA GASOLINE OVER HYDRAULIC PUMP

    WALKWAY:
    - 3/16" DIAMOND TREAD PLATE TWO-RAIL HAND RAIL TOE BOARD
    - INSTALLED ON BOTH SIDES OF CRUSHER TO ACCESS LUBESYSTEM AND OBSERVATION
    PLATFORM
    - ELEVATED PLATFORM TO OBSERVE CRUSHER FEED AREA BOTTOM ENCLOSED WITH AREA
    GUARDING
    - (2) STEEP ANGLE STAIR ASSEMBLIES TO GAIN ACCESS TO LOWER PLATFORM

    HYDRAULIC POWER UNIT ASSEMBLY:
    - POWER UNIT FABRICATED STEEL 50 GALLON TANK SKID TYPE MOUNTING FRAME TOP
    COVER MOUNTED MOTOR SUBMERGED GEAR TYPE PUMP SOLENOID CONTROL VALVES
    FILTER WITH REPLACEABLE CARTRIDGE BLADDER CLAMPING CYLINDER ACCUMULATOR
    REMOVABLE COVER TO PROTECTPOWER UNIT
    - CONTROLS BASIC STANDALONE SYSTEM WITH OPERATOR CONTROL BOX INCLUDES MAIN
    ADJUSTMENT AND PRESSURE MONITORING

    PACKAGE LUBE ASSEMBLY:
    - 10HP 1800 RPM 480V/3PH/60HZ
    - LUBE TANK SKID MOUNTED 80-GALLON CAPACITY HINGED TOP COVER TO VIEW RETURN
    OIL LINE 6KW LUBE TANK HEATER SIGHT GUAGE AND LOW OIL LEVEL SWITCH
    - OIL PUMP SUBMERGED GEAR TYPE 38 GPM FLOW 20 MICRON FILTER REPLACEABLE
    CARTRIDGE FILTER BYPASS RELIEF VALVE (2) PRESSURE DIFFERENTIAL SWITCHESFOR
    A DIRTY FILTER WARNING AND BYPASS ALARM
    - AIR COOLER AIR TYPE LUBE SYSTEM OIL COOLER RELIEF VALVE AND RELATED COOLER
    PRICING
    - SENSORS RELAY SWITCH SENSORS CRUSHER DRAIN LINE TEMPERATURE READOUT SUPPLY
    OIL TEMPERATURE READOUT LUBE TANK TEMPERATURE READOUT ALL SENSORS AND
    SWITCHES WIRED TO MOUNTED TERMINAL BOX
    - DRIVE BELT PACKAGE BELTED DRIVE PACKAGE INCLUDING DRIVE MOTOR SHEAVES AND
    V-BELTS
    - COLD WEATHER KIT INCLUDING ADDITIONAL RELAYS FOR PUMPSAND HEATERS ADDITIONAL
    TANK HEATER
    - AUTOMATION VANTAGE AUTOMATION WITH 125- TETHER

    ADDITIONAL INFORMATION:
    - PAINT (1) COAT PRIMER (1) FINISH COAT ENAMEL - WINDOW GRAY (RAL 7040) AND
    GRAPHITE GRAY (RAL 7024) ON THE CONE CARRIER PAINTED GRAPHITE GRAY (RAL
    7024) WITH ORANGE GUARDING LADDERS AND HANDRAILS
    - GUARDING FOR DRIVE AND TAIL PULLEYS V-BELT DRIVE AND RETURN IDLERS. GUARDS
    MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING
    INSPECTED.

    ELECTRICAL SWITCHGEAR P300RD AS DESCRIBED BELOW:
    - NEMA 4 ENCLOSURE CORD CAGE LEG KIT SETS ON GROUND FOR OPERATIONS SETS
    OVER KINGPIN FOR TRANSPORT. MAIN BREAKER WITH LOCKABLE OPERATOR.
    - 300 HP SOFT STARTER
    - FVNR 10 HP LUBEMOTOR
    - FVNR 10 HP HYDRAULIC PUMP
    - FVNR 5 HP COOLING FAN
    - FVNR 1/3 HP COUNTERSHAFT BLOWER
    - 6 KW 480V 3PH TANK HEATER FEED BREAKER
    - 6 KW 480V 3 PH HYD TANK HEATER FEED BREAKER (MAY NOT BE ONE)
    - FVNR 20 HP CRUSHER DISCHARGE (ON PLANT)
    -FVNR 20 HP (INTERLOCKED) FEED CONVEYOR WITH 60 AMP HUBBELL RECEPT
    - FVNR 20 HP RETURN CONVEYOR WITH 60 AMP HUBBELL RECEPT
    - 100FT REMOTE PENDANT E-STOP HOUR METER SAFETY START HORN.
    - VANTAGE AUTOMATED PLC INTERFACE FOR CRUSHER CONTROL AND MONITORING.
    - 100- POWER CORD