PrintClose   
                

Other 1313

General Equipment & Supplies, Inc.

Sales Department
4600 Valley Industrial Blvd S
Shakopee, Minnesota, 55379
USA
OFFICE +1 952 224-1500 FAX +1 (952) 224-1570
TOLL FREE (800) 966-1455
LANGUAGES SPOKEN English
Contact DealerSend to a FriendHotlist (5)Show All Pics (8)
SAY YOU SAW THIS ON EQUIPMENTLOCATOR.COM!!!
AVAILABILITY AND PRICE SUBJECT TO CHANGE AND/OR PRIOR SALE. SPECIFICATIONS AND EQUIPMENT CONFIGURATION IS SUBJECT TO CHANGE. PLEASE CONSULT A SALES PROFESSIONAL TO ENSURE THAT WEBSITE INFORMATION IS CORRECT AND UP-TO-DATE.
EQUIP. LOCATION
Shakopee, Minnesota, USA
STOCK #E00055056SERIAL#PCS-4-372-10AVAILABLEImmediately
MAKEOtherCATEGORYFor SalePRICE
620000 USD
620000
MODEL1313STATUSOn Yard
YEAR2010CLASSUsed
NOTES
  • USED RE-FURBISHED CR/FABTEC PORTABLE 1313 CLOSED CIRCUIT CRUSHING AND SCREENING PLANT EQUIPPED WITH:

    - CEDARPAIDS TSS6203-32 6 X 20 3-DECK SCREEN 40 HP 1200 RPM TEFC WITH END
    TENSION BOTTOM DECK 5- PANELS COIL SPRINGS
    - 2 PIECESCREEN CHUTE
    - HYDRAULIC SCREEN LIFT AND LOWER
    - CEDARAPIDS MVP380 CONE CRUSHER WITH MANGANESE: COARSE LINER PART #04800-
    300-67 MEDIUM MANTLE PART #04800-30-2401 MAN-IN-LOOP SYSTEM
    - WEG 300 HP 1200 RPM TEFC MOTOR
    - 8V BELT DRIVE WITH ENCLOSED MOTOR GUARD WITH INSPECTION DOORS
    - 4 AXLE CARRIER 24" WF 76# BEAMS HUTCH 9700 SERIES SUSPENSION 10- WIDE 61"
    C/C AXLE SPACING 22 500# STANDARD FORGE AXLES 11:00R X 22.5 TIRES SIX
    GROUND SUPPORT STANDS WITH JACKING PADS STANDARD FIFTH WHEEL PLATE AIR
    BRAKES LIGHTS AND MUD FLAPS
    - HEAVY DUTY CONE MOUNT WITH AR LINED DISCHARGE CHUTE WITH ADJUSTABLE SKIRT
    BOARD WIPERS AND MAINTENANCE DOOR
    - CONE FEED RING WITH EXPANDED METAL WINDOWS
    - 42" UNDER CONE CONVEYOR WITH 15 HP DRIVE WITH 3 PLY BELT 12" C/C ON IDLERS
    UNDER CONE WITH 36" C/C ON CEMA C SEALED IDLERS DODGE SCM BEARINGS 5207
    FALK SHAFT MOUNT REDUCER VULCANIZED LAGGED HEAD PULLEY SELF CLEANING WING
    TAIL PULLEY
    - (1) 18" X 12- PRODUCT CROSS CONVEYOR WITH MOTORIZED HEAD PULLEY
    - 42" OVERHEAD FEED CONVEYOR WITH HEAVY DUTY S-DRIVE HEAVY DUTY S-DRIVE WITH
    16" DRIVE PULLEY 14" BARE WRAP PULLEY 2 15/16" DODGE TYPE E PILLOW BLOCK
    BEARINGS WITH REMOTE LUBRICATION SELF CLEANING 14" WING TAIL PULLEY WITH
    DODGE SCM BEARINGS 14" HEAD PULLEY WITH DODGE SCM BEARINGS 3 PLY BELT
    IMPACT IDLERS IN FEED AREA THEN 36" SPACING ON CEMA C IDLERS FORMED SKIRT
    BOARD FIRST 15- STANDARD RETURN ROLLERS SLIDE-OVER SECTION FOR CONE
    MAINTENANCE HYDRAULIC RAISE AND LOWER
    - 36" X 10- REAR TRANSFER CONVEYOR 5 HP DRIVE DODGE SCM BEARINGS 18" SPACING
    ON CHANNEL INSET IDLERS FULL LENGTHFORMED SKIRT BOARD WITH ADJUSTABLE
    WIPERS
    - SCREEN FEEDING 1ST AND 2ND DECK INTO CONE WITH OPTION OF 2ND DECK DISCHARGING
    INTO PRODUCT CHUTE OR OPTIONAL CROSS CONVEYOR
    - 1/4" PL UNDER SCREEN COLLECTION HOPPER WITH ADJUSTABLE SKIRTBOARD WIPERS
    - 54" X 24- UNDER SCREEN CONVEYOR 10 HP DRIVE 2 PLY BELT 36" SPACING ON CEMA
    C PRECISION IDLERS VULCANIZED LAGGED HEAD PULLEY SELF CLEANING WING TAIL
    PULLEY DODGE SCM BEARINGS SUPERIOR EXTERRA BELT WIPER
    - 20FOLD DOWN WALKWAYS BOTH SIDES OF SCREEN AND 48" BACK PLATFORM WITH
    SKYWALK FLOOR 42" TUBESTEEL HANDRAILS AND ACCESS LADDER WALKWAYS BOTH SIDES
    OF CONE WITH LADDER
    - SAFETY GUARDS SAND BLASTED CHASSIS RUST INHIBITOR PRIMER ANDTWO FINISH
    COATS INCLUDED
    - GUARDING - WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL LOCAL CODES. IT IS
    THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED BY A LOCAL INSPECTOR
    - 4 LEG PLANT MOUNTED HYDRAULIC STABILIZING SYSTEM 12 VOLT HYD PACKAGE 70 000
    LB CAPACITY HYD LEGS WITH HEAVY DUTY FOOT PADS
    - FRONT LIFT HOOKS ON CARRIER
    - PROVISION FOR SLIDE-IN REJECT CONVEYOR
    - TOOL BOX

    - AES ELECTRICAL SWITCHGEAR:
    - 60X60 ENCLOSURE WITH MAIN AND OPERATOR - LOWER RH REVERSE FEED
    - 300 HP ABB SOFT START WITH BYPASS CONNECTOR
    - IEC/NEMA DUAL RATED FVNR STARTERS WITH CIRCUIT BREAKERS
    - 40 HP SCREEN
    - 25 HP OVERHEAD FEED
    - 20 HP SPARE 1 WITH 60 AMP CONNECTOR
    - 20HP SPARE 2 WITH 60 AMP CONNECTOR
    - 60 AMP FEED BREAKER WITH 60 AMP CONNECTOR
    - 100 AMP FEED BREAKER WITH 100 AMP CONNECTOR
    - 10 HP UNDERSCREEN
    - 15 HP UNDER CRUSHER DISCHARGE
    - 5 HP SLIDE IN REJECT WITH 20 AMP CONNECTOR
    - 5 HP CROSS 1
    - 5 HP CROSS 2
    - 5 HP REAR CROSS - REVERSING STARTER
    - STARTERS FOR JCI CONE LUBE (3HP) COOLING (1HP) HYD (15HP) AND KCS
    INTERLOCKS (CONTROL COMES FORM KCS PANEL)
    - 7.5 KVA TRANSFORMER WITH 20 A110V SERVICE HOUR METER SAFETY
    STARTUP HORN (MANUAL) E-STOP 100FT REMOTE PENDANT
    - 100 FT POWER CORD